A new option is added to btrfs-receive to change the behavior when
an <end cmd> is received in the Btrfs send stream.
The traditional behavior (which still is the default) is to continue
to read the stream until an EOF condition is encountered. If an
<end cmd> is received, afterwards either an EOF or a new
<stream header> is expected.
The new behavior (if the -e option is set on the command line) is
to terminate after an <end cmd> is read without the need for an EOF.
This allows the stream (e.g. a single TCP stream) to carry additional
data or even multiple Btrfs send streams.
Old btrfs-send tools used to encode multiple snapshots like this
(with 2 snapshots in this example):
<stream header> + <sequence of commands> + <end cmd> +
<stream header> + <sequence of commands> + <end cmd> + EOF
If the new -e option is set, the expected format is like this:
<stream header> + <sequence of commands> +
<sequence of commands> + <end cmd>
The btrfs-send tool is changed in a seperate commit to always use
the new format, i.e. to send an <end cmd> only at the end.
Note that the currently existing receivers treat <end cmd> only as
an indication that a new <stream header> is following. This means,
you can just skip the sequence <end cmd> <stream header> without
loosing compatibility. As long as an EOF is following, the currently
existing receivers handle the new format (if the two new flags are
used) exactly as the old one.
The goal of changing the semantic of <end cmd> is to be able to use
a single stream (one TCP connection) to multiplex a request/response
handshake plus Btrfs send streams, all in the same stream. In this
case you cannot evaluate an EOF condition as an end of the Btrfs send
stream. You need something else, and the <end cmd> is just perfect
for this purpose.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
When an entry was added to the subvol search tree, the root_id was
always 0 (not set at all) and therefore only the first one was
added, all the others had been ignored. This commit sets the root_id
before the entry is added.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
There used to be 2 levels of verbose output, now there are 3:
- None at all (no -v option given).
- Some information about received snapshots / subvolumes (-v option).
- Each received command is printed (-vv option).
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Nothing really important since this is not part of the library and
at the end exit() is called.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
There was no way to free the memory that was used for the
subvol_uuid_search functions. Since this is part of the libbtrfs,
add such a cleanup function.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Extending usage messages with some info on the quota functionality:
- The -i option of "subvol create" and "subvol snapshot" was not
documented
- The -c option of "qgroup limit" is the default option
- The "qouta rescan" command is not yet implemented, while it should be
executed after enabling quota on a non-empty filesystem.
Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
In trying to track down a weird tree log problem I wanted to make sure that the
free space cache was actually valid, which we currently have no way of doing.
So this patch adds a bunch of support for the free space cache code and then a
checker to fsck. Basically we go through and if we can actually load the free
space cache then we will walk the extent tree and verify that the free space
cache exactly matches what is in the extent tree. Hopefully this will always be
correct, the only time it wouldn't is if the extent tree is corrupt or we have
some sort of awful bug in the free space cache. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This extref feature (lifting the single file hardlink limitation) is new
and not backward compatible with older kernels that are still in wide
use.
For now, use btrfstune to enable the feature, in the future it will be
possible to turn it on within mkfs by -O option.
Signed-off-by: David Sterba <dsterba@suse.cz>
We are going to unify enabling filesystem features via option -O.
For now, use btrfstune to enable the features.
Signed-off-by: David Sterba <dsterba@suse.cz>
This fixes up the progs to properly deal with skinny metadata. This adds the -x
option to mkfs and btrfstune for enabling the skinny metadata option. This also
makes changes to fsck so it can properly deal with the skinny metadata entries.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
send-test.c links against libbtrfs and uses the send functionality provided
to decode and print a send stream to the console.
66819df "btrfs-progs: add send-test" contained this file when
submitted, but somehow got lost on commit.
[sandeen@redhat.com: Resurrect lost send-test.c from original commit]
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Trivial patch:
./btrfs-progs/btrfs-select-super -s 0 /dev/sdc
using SB copy 0, bytenr 65536
No valid Btrfs found on /dev/sdc
Open ctree failed
The line 'using..' is confusing which gives an
indication that command is successful
This patch will avoid that when command fails
Signed-off-by: Anand Jain <anand.jain@oracle.com>
In the cases where one of the disk is not suitable for
btrfs, then we would fail the mkfs, however we determine
that after we have written btrfs to the preceding disks.
At this time if user changes mind for not to use btrfs
will left with no choice.
So this patch will check if all the provided disks are
suitable for the btrfs at once before proceeding to
create btrfs on a disk.
Further this patch also removed duplicate code to check
device suitability for the btrfs.
Next, there is an existing bug about the -r mkfs option,
which this patch would carry forward most of it.
Ref:
[PATCH 2/2, RFC] btrfs-progs: overhaul mkfs.btrfs -r option
Signed-off-by: Anand Jain <anand.jain@oracle.com>
to merg prev
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Having no balance running/ paused/completed is a normal
situation, so the current output message should be positive
with return val zero.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
/etc/mtab is not working correctly in situations where multiple
mount namespaces are used. Use /proc/mounts instead like the
rest of the code is doing it.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
This tool can be used to compute btrfs' style crc32c checksums for filenames
as done by the kernel. Additionally, there is -c mode to do a brute force
search for file names with a given checksum.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
In "[ \fB\-f\fP\fI ]", the "\fI" will result in the front half "["of
"[ -f ]" doesn't the back half "]"; When you issue the command
"man mkfs.btrfs", you will see the difference.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Previously btrfs-image would set a METADUMP flag and would make one big system
chunk to cover the entire file system in the super in order to get around the
unpleasant business of having to adjust the chunk tree. This meant that you
could use the progs stuff on a restored file system, which is great for testing
btrfsck and other such things. But we want to be able to run the tree log
replay on a file system that is not able to run the tree log replay. So in
order to do this we need to fixup the super's chunk array and the chunk tree
itself. This is pretty easy since we restore using the logical offsets of the
metadata, so we just have to set the chunk items to have 1 stripe and have the
stripes point at the primary device and then use the logical offset of the chunk
as the physical offset. With this patch I can restore a file system image that
had a tree log and mount the file system and have the log be replayed
successfully. This patch also gives you the -o option in case you want the old
restore way, in the case where we want to make sure the system chunks as they
were given to us are correct. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A lot of tree log replay bugs are because of strange space cache setups, so make
btrfs-image scrape the free space cache as well so we can better replicate what
a user is seeing if they have a tree log bug or anything related to free space
cache. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Currently btrfs-image doesn't copy the tree logs, which doesn't help me when
we're trying to debug log replay bugs. Since we don't have entries in the
extent root for the blocks we have to walk down all of the trees in order to
copy them. With this patch I can image a file system with a tree log and it
works fine. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We use BUG_ON() everywhere in btrfs-image. When users are going to use this
command things are pretty dire, so I'd rather have really good error messages so
I know what happened rather than figure out which one of the 20 BUG_ON()'s made
the stupid thing exit early. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
This tool draws per-chunk pngs representing the allocation map. A black
or colored dot means the block is allocated.
The output is written to a subdirectory, together with an index.html to be
viewed in a browser.
There are options to control whether color should be used and which block
group types should be printed.
To build, you need to have libpng and libgd installed. It is not part of
the 'all' target, so please build it explicitely with make btrfs-fragments.
A (rather untypical) example can be seen at
http://sensille.com/fragments
Please regard this as a first scratch version and feel free to improve it :)
Signed-off-by: Arne Jansen <sensille@gmx.net>
The btrfs tool is changed in order to support command line parameters
to configure the IO priority of the scrub tasks. Also the default is
changed. The default IO priority for scrub is the idle class now.
The behavior is the same as when one would type
'ionice ... btrfs scrub start ...' or 'ionice ... btrfs scrub resume ...'
(without this patch applied).
The only reason for adding this to the btrfs tool is that it was not
documented and not obvious that it worked like this, that all internal
scrub tasks inherited the IO priority values of the btrfs tool that is
starting or resuming the scrub operation.
Note that after applying the patch it is no longer possible to set
the IO priority using ionice since the btrfs tool always configures
the priority in order to run in the idle class by default.
Some basic performance measurements have been done with the goal to
measure which IO priority for scrub gives the best overall disk data
throughput. The kernel was configured to use the CFQ IO scheduler
with default configuration and without support for throttling. The
summary is, that the more the disk head movements are avoided, the
faster the overall disk transfer capacity is, which is not really a
big surprise. Therefore it makes sense that the best data throughput
was measured setting the scrub IO priority and the scrub readahead
IO priority to the idle class priority. Running with idle class IO
priority means that scrub and scrub readahead IO is paused while
other tasks access the disk. Doing the tasks one after the other
instead of concurrently avoids many disk head movements. The
overall data throughput of rotating disks is improved this way.
However, if it is desired to have the scrub task done within a
reasonable time, and if at the same time the filesystem is heavily
loaded, the idle IO priority should be avoided. Otherwise the scrub
operation will never take place and thus never terminate.
The best effort IO priority class with the subclass 7 (the lowest
one in the best effort class) is recommended in the case of always
heavily loaded hard disks. If the filesystem is not loaded all the
time and leaves some idle slots for scrub, the idle class IO priority
is recommended. The idle class now is the default if the scrub
operation is started with the btrfs-progs tools.
Note that the patch that sets the scrub readahead IO priority to the
idle class is a seperate patch, this needs to be done in the kernel.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
* create .static.o version from the library objects as well and use them
for building static targets
* remove build dependencies on libbtrfs.*
* other minor cleanups
Signed-off-by: David Sterba <dsterba@suse.cz>
With the commit 002d021c (committed October 2011)
btrfsctl, btrfs-vol, btrfs-show were declared deprecated.
The last patches related to these commands are dated December 2010.
These tools are replaced by the "btrfs" tool in all the
functionality.
This commit removes all the related code.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: David Sterba <dsterba@suse.cz>
Detected by gentoo's QA checker:
* QA Notice: Files built without respecting LDFLAGS have been detected
* Please include the following list of files in your report:
* /usr/lib/libbtrfs.so.0.1
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
I've been working on btrfs-image and I kept seeing these leaks pop up on
valgrind so I'm just fixing them. We don't properly cleanup the device cache,
the chunk tree mapping cache, or the space infos on close. With this patch
valgrind doesn't complain about any memory leaks running btrfs-image. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We just free the log root after we set it up when we open a ctree in the tools.
This isn't nice, it makes double free's and leaks eb's, makes segfaults with
btrfs-image. So fix this to be correct, and fix the cleanup if the buffer is
not uptodate. With this fix I no longer segfault trying to do btrfs-image on a
file system with a log tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We can't use ext2_dir_entry_2 typecast on big endian machines directly.
The bytes do not get converted during extX block read due to missing
flag EXT2_DIRBLOCK_V2_STRUCT passed down to ext2fs_read_dir_block4 from
ext2fs_process_dir_block. Fixing on the ext2 side needs updating callers
and (maybe) the library interfaces. We'll fix it on the convert side for
now.
CC: Jan Kara <jack@suse.cz>
Signed-off-by: David Sterba <dsterba@suse.cz>
Since restore has the ability to open really really screwed up file systems, add
a list roots option to it so we can still get the contents of the tree root on a
horribly broken fs. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
search_dir() recurses down the btrfs tree, and used to take the output
path for every item (i.e. in the running system, output root directory
concatenated with btrfs-local pathname) passed as the only path
parameter. Moving the output root directory to a separate parameter
and passing the btrfs-local pathname for each file and directory
separately allows easy filtering based on the btrfs-local pathname.
Signed-off-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Josef Bacik <josef@redhat.com>
If we hit a bad disk and the read doesn't work, try other mirrors in case we
have other disks with good copies. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This will make the restore program fall back on other mirrors if it fails to
decompress an extent for whatever reason. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If the normal fs tree is hosed and the user has multiple subvolumes it's handy
to be able to specify just one of the subvolumes to restore. It's also handy if
a user only wants to restore say /home instead of his entire disk. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Stefan Behrens