When checking for exact compatibility between types (such as in
__builtin_types_compatible_p) consider the case of default signedness to
be incompatible with both of the explicit signedness for char. That is,
char is incompatible with signed char *and* unsigned char, no matter
what the default signedness for char is.
negate(x) is subtract(-0,x), not subtract(+0,x), which makes
a difference with signed zeros. Also +x was expressed as x+0,
in order for the integer promotions to happen, but also mangles signed
zeros, so just don't do that with floating types.
Applying 64bit relocs assumes that the CVal is initialized to zero
for the whole 64bit. Consolidate this a bit, at the same time
zeroing the .ull member more consistently when needed. Fixes segfault
on x86_64-linux using global vars in tcctest.c.
Refactoring (no logical changes):
- use memcpy in tccgen.c:ieee_finite(double d)
- use union to store attribute flags in Sym
Makefile: "CFLAGS+=-fno-strict-aliasing" basically not necessary
anymore but I left it for now because gcc sometimes behaves
unexpectedly without.
Also:
- configure: back to mode 100755
- tcc.h: remove unused variables tdata/tbss_section
- x86_64-gen.c: adjust gfunc_sret for prototype
- tccgen: error out for cast to void, as in
void foo(void) { return 1; }
This avoids an assertion failure in x86_64-gen.c, also.
also fix tests2/03_struct.c accordingly
- Error: "memory full" - be more specific
- Makefiles: remove circular dependencies, lookup tcctest.c from VPATH
- tcc.h: cleanup lib, include, crt and libgcc search paths"
avoid duplication or trailing slashes with no CONFIG_MULTIARCHDIR
(as from 9382d6f1a0)
- tcc.h: remove ";{B}" from PE search path
in ce5e12c2f9 James Lyon wrote:
"... I'm not sure this is the right way to fix this problem."
And the answer is: No, please. (copying libtcc1.a for tests instead)
- win32/build_tcc.bat: do not move away a versioned file
The procedure calling standard for ARM architecture mandate the use of
the base standard for variadic function. Therefore, hgen float aggregate
must be returned via stack when greater than 4 bytes and via core
registers else in case of variadic function.
This patch improve gfunc_sret() to take into account whether the
function is variadic or not and make use of gfunc_sret() return value to
determine whether to pass a structure via stack in gfunc_prolog(). It
also take advantage of knowing if a function is variadic or not move
float result value from VFP register to core register in gfunc_epilog().
Move the logic to do a test of an integer value (ex if (0)) out of
arch-specific code to tccgen.c to avoid code duplication. This also
fixes test of long long value which was only testing the bottom half of
such values on 32 bits architectures.
- avoid assumption "ret_align == register_size" which is
false for non-arm targets
- rename symbol "sret" to more descriptive "ret_nregs"
This fixes commit dcec8673f2
Also:
- remove multiple definitions in win32/include/math.h
On ARM with hardfloat calling convention, structure containing 4 fields
or less of the same float type are returned via float registers. This
means that a structure can be returned in up to 4 double registers in a
structure is composed of 4 doubles. This commit adds support for return
of structures in several registers.
TLS support in tinyCC is absolutely not ready:
- segment register not select in load and store
- no relocation added for computing offset of per-thread symbol
- no support for TLS-specific relocations
- no program header added as per Drepper document about TLS
This reverts commit 1c4afd1350.
Prevent the following code from compiling:
enum color {RED, GREEN, BLUE};
enum color {R, G, B};
int main()
{
return R;
}
Reported-by: John Haque <j.eh@mchsi.com>
Use one more bit in AttributeDef to differenciate between declared
function (only its prototype is known) and defined function (its body is
also known). This allows to generate an error in cases like:
int f(){return 0;}
int f(){return 1;}
VLA storage is now freed when it goes out of scope. This makes it
possible to use a VLA inside a loop without consuming an unlimited
amount of memory.
Combining VLAs with alloca() should work as in GCC - when a VLA is
freed, memory allocated by alloca() after the VLA was created is also
freed. There are some exceptions to this rule when using goto: if a VLA
is in scope at the goto, jumping to a label will reset the stack pointer
to where it was immediately after the last VLA was created prior to the
label, or to what it was before the first VLA was created if the label
is outside the scope of any VLA. This means that in some cases combining
alloca() and VLAs will free alloca() memory where GCC would not.
Also made XMM0-7 available for use as temporary registers, since they
are not used by the ABI. I'd like to do the same with RSI and RDI but
that's trickier since they can be used by gv() as temporary registers
and there isn't a way to disable that.
All tests pass. I think I've caught all the cases assuming only XMM0 is
used. I expect that Win64 is horribly broken by this point though,
because I haven't altered it to cope with XMM1.
I've had to introduce the XMM1 register to get the calling convention
to work properly, unfortunately this has broken a fair bit of code
which assumes that only XMM0 is used.
There are probably still issues on x86-64 I've missed.
I've added a few new tests to abitest, which fail (2x long long and 2x double
in a struct should be passed in registers).
abitest now passes; however test1-3 fail in init_test. All other tests
pass. I need to re-test Win32 and Linux-x86.
I've added a dummy implementation of gfunc_sret to c67-gen.c so it
should now compile, and I think it should behave as before I created
gfunc_sret.
I expect that Linux-x86 is probably fine. All other architectures
except ARM are definitely broken since I haven't yet implemented
gfunc_sret for these, although replicating the current behaviour
should be straightforward.
Should fix some warnings wrt. access out of array bounds.
tccelf.c: fix "static function unused" warning
x86_64-gen.c: fix "ctype.ref uninitialzed" warning and cleanup
tcc-win32.txt: remove obsolete limitation notes.
This reverts commit 63193d1794.
Had some problems (_STATIC_ASSERT) and was too ugly anyway.
For retry, I'd suggest to implement a general function
static inline void memswap (void *p1, void* p2, size_t n);
and then use that. If you do so, please keep the original code
as comment.
This replaces commit 3d409b0889
- revert old fix in libtcc.c
- #include_next: look up the file in the include stack to see
if it is already included.
Also:
- streamline include code
- remove 'type' from struct CachedInclude (obsolete because we check
full filename anyway)
- remove inc_type & inc_filename from struct Bufferedfile (obsolete)
- fix bug with TOK_FLAG_ENDIF not being reset
- unrelated: get rid of an 'variable potentially uninitialized' warning
For vstack Fabrice used the trick to initialize vtop to &vstack[-1], so
that on first push, vtop becomes &vstack[0] and a value is also stored
there - everything works.
Except that when tcc is compiled with bounds-checking enabled, vstack - 1
returns INVALID_POINTER and oops...
Let's workaround it with artificial 1 vstack slot which will not be
used, but only serve as an indicator that pointing to &vstack[-1] is ok.
Now, tcc, after being self-compiled with -b works:
$ ./tcc -B. -o tccb -DONE_SOURCE -DCONFIG_MULTIARCHDIR=\"i386-linux-gnu\" tcc.c -ldl
$ cd tests
$ ../tcc -B.. -run tcctest.c >1
$ ../tccb -B.. -run tcctest.c >2
$ diff -u 1 2
and note, tcc's compilation speed is not affected:
$ ./tcc -B. -bench -DONE_SOURCE -DCONFIG_MULTIARCHDIR=\"i386-linux-gnu\" -c tcc.c
before: 8270 idents, 47221 lines, 1527730 bytes, 0.152 s, 309800 lines/s, 10.0 MB/s
after: 8271 idents, 47221 lines, 1527733 bytes, 0.152 s, 310107 lines/s, 10.0 MB/s
But note, that `tcc -b -run tcc` is still broken - for example it crashes
on
$ cat x.c
double get100 () { return 100.0; }
$ ./tcc -B. -b -DTCC_TARGET_I386 -DCONFIG_MULTIARCHDIR=\"i386-linux-gnu\" -run \
-DONE_SOURCE ./tcc.c -B. -c x.c
Runtime error: dereferencing invalid pointer
./tccpp.c:1953: at 0xa7beebdf parse_number() (included from ./libtcc.c, ./tcc.c)
./tccpp.c:3003: by 0xa7bf0708 next() (included from ./libtcc.c, ./tcc.c)
./tccgen.c:4465: by 0xa7bfe348 block() (included from ./libtcc.c, ./tcc.c)
./tccgen.c:4440: by 0xa7bfe212 block() (included from ./libtcc.c, ./tcc.c)
./tccgen.c:5529: by 0xa7c01929 gen_function() (included from ./libtcc.c, ./tcc.c)
./tccgen.c:5767: by 0xa7c02602 decl0() (included from ./libtcc.c, ./tcc.c)
that's because lib/bcheck.c runtime needs more fixes -- see next
patches.
Continuing d6072d37 (Add __builtin_frame_address(0)) implement
__builtin_frame_address for levels greater than zero, in order for
tinycc to be able to compile its own lib/bcheck.c after
cffb7af9 (lib/bcheck: Prevent __bound_local_new / __bound_local_delete
from being miscompiled).
I'm new to the internals, and used the most simple way to do it.
Generated code is not very good for levels >= 2, compare
gcc tcc
level=0 mov %ebp,%eax lea 0x0(%ebp),%eax
level=1 mov 0x0(%ebp),%eax mov 0x0(%ebp),%eax
level=2 mov 0x0(%ebp),%eax mov 0x0(%ebp),%eax
mov (%eax),%eax mov %eax,-0x10(%ebp)
mov -0x10(%ebp),%eax
mov (%eax),%eax
level=3 mov 0x0(%ebp),%eax mov 0x0(%ebp),%eax
mov (%eax),%eax mov (%eax),%ecx
mov (%eax),%eax mov (%ecx),%eax
But this is still an improvement and for bcheck we need level=1 for
which the code is good.
For the tests I had to force gcc use -O0 to not inline the functions.
And -fno-omit-frame-pointer just in case.
If someone knows how to improve the generated code - help is
appreciated.
Thanks,
Kirill
Cc: Michael Matz <matz@suse.de>
Cc: Shinichiro Hamaji <shinichiro.hamaji@gmail.com>
Currently, VLA are not forbidden for static variable. This leads to
problems even if for fixed-size array when the size expression uses the
ternary operator (cond ? then-value : else-value) because it is parsed
as a general expression which leads to code generated in this case.
This commit solve the problem by forbidding VLA for static variables.
Although not required for the fix, avoiding code generation when the
expression is constant would be a nice addition though.
The code for shifts is now similar to code for binary arithmetic operations,
except that only the first argument is considered, as required by the ISO C
standard.
On 2012-06-26 15:07:57 +0200, Vincent Lefevre wrote:
> ISO C99 TC3 says: [6.5.7#3] "The integer promotions are performed on
> each of the operands. The type of the result is that of the promoted
> left operand."
I've written a patch (attached). Now the shift problems no longer
occur with the testcase and with GNU MPFR's "make check".
--
Vincent Lefèvre <vincent@vinc17.net> - Web: <http://www.vinc17.net/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.net/blog/>
Work: CR INRIA - computer arithmetic / AriC project (LIP, ENS-Lyon)
Sometimes the result of a comparison is not directly used in a jump,
but in arithmetic or further comparisons. If those further things
do a vswap() with the VT_CMP as current top, and then generate
instructions for the new top, this most probably destroys the flags
(e.g. if it's a bitfield load like in the example).
vswap() must do the same like vsetc() and not allow VT_CMP vtops
to be moved down.
This matters when sizeof is directly used in arithmetic,
ala "uintptr_t t; t &= -sizeof(long)" (for alignment). When sizeof
isn't size_t (as it's specified to be) this masking will truncate
the high bits of the uintptr_t object (if uintptr_t is larger than
uint).
This needs to be accepted:
typedef int foo;
void f (void) { foo: return; }
namespaces for labels and types are different. The problem is that
the block parser always tries to find a decl first and that routine
doesn't peek enough to detect this case. Needs some adjustments
to unget_tok() so that we can call it even when we already called
it once, but next() didn't come around restoring the buffer yet.
(It lazily does so not when the buffer becomes empty, but rather
when the next call detects that the buffer is empty, i.e. it requires
two next() calls until the unget buffer gets switched back).
Removes a premature optimization of char/short loads
rewriting the source type. It did so also for bitfield
loads, thereby removing all the shifts/maskings.
(cond ? 0 : ptr)->member wasn't handled correctly. If one arm
is a null pointer constant (which also can be a pointer) the result
type is that of the other arm.
This fixes a bug introduced in commit
8d107d9ffd
that produced wrong code because of interference between
0x10 bits VT_CONST and x86_64-gen.c:TREG_MEM
Also fully zero-pad long doubles on x86-64 to avoid random
bytes in output files which disturb file comparison.
This allows passing colon separated paths to
tcc_add_library_path
tcc_add_sysinclude_path
tcc_add_include_path
Also there are new configure variables
CONFIG_TCC_LIBPATH
CONFIG_TCC_SYSINCLUDE_PATHS
which define the lib/sysinclude paths all in one and can
be overridden from configure/make
For TCC_TARGET_PE semicolons (;) are used as separators
Also, \b in the path string is replaced by s->tcc_lib_path
(CONFIG_TCCDIR rsp. -B option)
Since no code should be generated outside a function, force expr_cond to
only consider constant expression when outside a function since the
generic code can generate some code.
Basically, with:
typedef __attribute__((aligned(16))) struct _xyz {
...
} xyz, *pxyz;
we want the struct aligned but not the pointer.
FIXME: This patch is a hack, waiting for someone in the knowledge
of correct __attribute__ semantics.
VLA inserts a call to alloca via enum TOK_alloca, but TOK_alloca
only exists on I386 and X86_64 targets. This patch just emits an
error at compile-time if someone tries to compile some VLA code
for a TOK_alloca-less target. The best solution might be to just
push the problem to link-time, since the existence-or-not of a
alloca implementation can only be determined by linking. It seems
like just declaring TOK_alloca unconditionally would achieve that,
but for now, this at least gets the cross compilers to build.
I don't know if it makes a difference to gen_op(TOK_PDIV) or not,
but logically the ptr1_is_vla test in TP's VLA patch seems out of
order, where the patch to fix it would be:
------------------------------------------------------------------
@@ -1581,15 +1581,15 @@ ST_FUNC void gen_op(int op)
u = pointed_size(&vtop[-1].type);
}
gen_opic(op);
+ if (ptr1_is_vla)
+ vswap();
/* set to integer type */
#ifdef TCC_TARGET_X86_64
vtop->type.t = VT_LLONG;
#else
vtop->type.t = VT_INT;
#endif
- if (ptr1_is_vla)
- vswap();
- else
+ if (!ptr1_is_vla)
vpushi(u);
gen_op(TOK_PDIV);
} else {
------------------------------------------------------------------
Instead of that patch, which increases the complexity of the code,
this one fixes the problem by just rolling back and retrying with
a simpler approach.
A VLA is not really an array, it's a pointer-to-an-array.
Making this explicit allows us to back out a few parts
of the original VLA patch and paves the way for the next
part of the fix, where a VLA will be stored on the runtime
stack as a pointer-to-an-array, rather than on the compile-
time stack as a Sym*.
test target in Makefile does not depend on tcc.
i'm not sure why, but i can think of at least one
good reason. in my local tree I have it modified
to do so, but somehow inadvertently reverted that
so when i did "make test" before committing, it
didn't actually test my changes. sorry.
previously, tcc would accept a prototype of a function returning
an array, but not giving those functions bodies nor calling them.
it seems that gcc has never supported them, so we should probably
just error out... but it's possible that someone already using
tcc includes some header that contains an unused prototype for
one, so let's continue to support that.
Thomas Preud'homme