btrfs-progs/Documentation/btrfs-device.asciidoc

245 lines
8.5 KiB
Plaintext

btrfs-device(8)
===============
NAME
----
btrfs-device - manage devices of btrfs filesystems
SYNOPSIS
--------
*btrfs device* <subcommand> <args>
DESCRIPTION
-----------
The *btrfs device* command group is used to manage devices of the btrfs filesystems.
DEVICE MANAGEMENT
-----------------
Btrfs filesystem can be created on top of single or multiple block devices.
Data and metadata are organized in allocation profiles with various redundancy
policies. There's some similarity with traditional RAID levels, but this could
be confusing to users familiar with the traditional meaning. Due to the
similarity, the RAID terminology is widely used in the documentation. See
`mkfs.btrfs`(9) for more details and the exact profile capabilities and
constraints.
The device management works on a mounted filesystem. Devices can be added,
removed or replaced, by commands profided by *btrfs device* and *btrfs replace*.
The profiles can be also changed, provided there's enough workspace to do the
conversion, using the *btrfs balance* command and namely the filter 'convert'.
Profile::
A profile describes an allocation policy based on the redundancy/replication
constrants in connection with the number of devices. The profile applies to
data and metadata block groups separately.
RAID level::
Where applicable, the level refers to a profile that matches constraints of the
standard RAID levels. At the moment the supported ones are: RAID0, RAID1,
RAID10, RAID5 and RAID6.
See the section *TYPICAL USECASES* for some examples.
SUBCOMMAND
----------
*add* [-Kf] <dev> [<dev>...] <path>::
Add device(s) to the filesystem identified by <path>.
+
If applicable, a whole device discard (TRIM) operation is performed prior to
adding the device. A device with existing filesystem detected by `blkid`(8)
will prevent device addition and has to be forced. Alternatively the filesystem
can be wiped from the device using eg. the `wipefs`(8) tool.
+
The operation is instant and does not affect existing data. The operation merely
adds the device to the filesystem structures and creates some block groups
headers.
+
`Options`
+
-K|--nodiscard::::
do not perform discard (TRIM) by default
-f|--force::::
force overwrite of existing filesystem on the given disk(s)
*remove* <dev>|<devid> [<dev>|<devid>...] <path>::
Remove device(s) from a filesystem identified by <path>
+
Device removal must satisfy the profile constraints, otherwise the command
fails. The filesystem must be converted to profile(s) that would allow the
removal. This can typically happen when going down from 2 devices to 1 and
using the RAID1 profile. See the example section below.
+
The operation can take long as it needs to move all data from the device.
+
NOTE: It is not possible to delete the device that was used to mount the
filesystem. This is a limitation given by the VFS.
*delete* <dev>|<devid> [<dev>|<devid>...] <path>::
Alias of remove kept for backward compatibility
*ready* <device>::
Wait until all devices of a multiple-device filesystem are scanned and registered
within the kernel module.
*scan* [(--all-devices|-d)|<device> [<device>...]]::
Scan devices for a btrfs filesystem and register them with the kernel module.
This allows mounting multiple-device filesystem by specifying just one from the
whole group.
+
If no devices are passed, all block devices that blkid reports to contain btrfs
are scanned.
+
The options '--all-devices' or '-d' are deprecated and kept for backward compatibility.
If used, behavior is the same as if no devices are passed.
+
The command can be run repeatedly. Devices that have been already registered
remain as such. Reloading the kernel module will drop this information. There's
an alternative way of mounting multiple-device filesystem without the need for
prior scanning. See the mount option 'device'.
*stats* [-z] <path>|<device>::
Read and print the device IO error statistics for all devices of the given
filesystem identified by <path> or for a single <device>. See section *DEVICE
STATS* for more information.
+
`Options`
+
-z::::
Print the stats and reset the values to zero afterwards.
*usage* [options] <path> [<path>...]::
Show detailed information about internal allocations in devices.
+
`Options`
+
-b|--raw::::
raw numbers in bytes, without the 'B' suffix
-h|--human-readable::::
print human friendly numbers, base 1024, this is the default
-H::::
print human friendly numbers, base 1000
--iec::::
select the 1024 base for the following options, according to the IEC standard
--si::::
select the 1000 base for the following options, according to the SI standard
-k|--kbytes::::
show sizes in KiB, or kB with --si
-m|--mbytes::::
show sizes in MiB, or MB with --si
-g|--gbytes::::
show sizes in GiB, or GB with --si
-t|--tbytes::::
show sizes in TiB, or TB with --si
If conflicting options are passed, the last one takes precedence.
TYPICAL USECASES
----------------
STARTING WITH A SINGLE-DEVICE FILESYSTEM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Assume we've created a filesystem on a block device '/dev/sda' with profile
'single/single' (data/metadata), the device size is 50GiB and we've used the
whole device for the filesystem. The mount point is '/mnt'.
The amount of data stored is 16GiB, metadata have allocated 2GiB.
==== ADD NEW DEVICE ====
We want to increase the total size of the filesystem and keep the profiles. The
size of the new device '/dev/sdb' is 100GiB.
$ btrfs device add /dev/sdb /mnt
The amount of free data space increases by less than 100GiB, some space is
allocated for metadata.
==== CONVERT TO RAID1 ====
Now we want to increase the redundancy level of both data and metadata, but
we'll do that in steps. Note, that the device sizes are not equal and we'll use
that to show the capabilities of split data/metadata and independent profiles.
The constraint for RAID1 gives us at most 50GiB of usable space and exactly 2
copies will be stored on the devices.
First we'll convert the metadata. As the metadata occupy less than 50GiB and
there's enough workspace for the conversion process, we can do:
$ btrfs balance start -mconvert=raid1 /mnt
This operation can take a while as the metadata have to be moved and all block
pointers updated. Depending on the physical locations of the old and new
blocks, the disk seeking is the key factor affecting performance.
You'll note that the system block group has been also converted to RAID1, this
normally happens as the system block group also holds metadata (the physical to
logial mappings).
What changed:
* available data space decreased by 3GiB, usable rougly (50 - 3) + (100 - 3) = 144 GiB
* metadata redundancy increased
IOW, the unequal device sizes allow for combined space for data yet improved
redundancy for metadata. If we decide to increase redundancy of data as well,
we're going to lose 50GiB of the second device for obvious reasons.
$ btrfs balance start -dconvert=raid1 /mnt
The balance process needs some workspace (ie. a free device space without any
data or metadata block groups) so the command could fail if there's too much
data or the block groups occupy the whole first device.
The device size of '/dev/sdb' as seen by the filesystem remains unchanged, but
the logical space from 50-100GiB will be unused.
DEVICE STATS
------------
The device stats keep persistent record of several error classes related to
doing IO. The current values are printed at mount time and updated during
filesystem lifetime or from a scrub run.
$ btrfs device stats /dev/sda3
[/dev/sda3].write_io_errs 0
[/dev/sda3].read_io_errs 0
[/dev/sda3].flush_io_errs 0
[/dev/sda3].corruption_errs 0
[/dev/sda3].generation_errs 0
write_io_errs::
Failed writes to the block devices, means that the layers beneath the
filesystem were not able to satisfy the write request.
read_io_errors::
Read request analogy to write_io_errs.
flush_io_errs::
Number of failed writes with the 'FLUSH' flag set. The flushing is a method of
forcing a particular order between write requests and is crucial for
implementing crash consistency. In case of btrfs, all the metadata blocks must
be permanently stored on the block device before the superblock is written.
corruption_errs::
A block checksum mismatched or a corrupted metadata header was found.
generation_errs::
The block generation does not match the expected value (eg. stored in the
parent node).
EXIT STATUS
-----------
*btrfs device* returns a zero exit status if it succeeds. Non zero is
returned in case of failure.
AVAILABILITY
------------
*btrfs* is part of btrfs-progs.
Please refer to the btrfs wiki http://btrfs.wiki.kernel.org for
further details.
SEE ALSO
--------
`mkfs.btrfs`(8),
`btrfs-replace`(8),
`btrfs-balance`(8)