Add support for a new metadata_uuid field. This is just a preparatory
commit which switches all users of the fsid field for metdata comparison
purposes to utilize the new field. This more or less mirrors the
kernel patch, additionally:
* Update 'btrfs inspect-internal dump-super' to account for the new
field. This involes introducing the 'metadata_uuid' line to the
output and updating the logic for comparing the fs uuid to the
dev_item uuid.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's unlikely we're going to modify a pathname argument, so codify that
and use const.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function has been copied twice in chunk-recover and super-recover. Factor
it out into utils.c/h and use it. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently transaction bugs out insided btrfs_start_transaction in case
of error, we want to lift the error handling to the callers. This patch
adds the BUG_ON anywhere it's been missing so far. This is not the best
way of course. Transforming BUG_ON to a proper error handling highly
depends on the caller and should be dealt with case by case.
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have cached block sizes in fs_info, there is no need to specify
these sizes in btrfs_setup_root() function.
And refactor all root->sector/node/stripesize users in disk-io.c.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
btrfs_fs_info
Just like what we do in kernel, since we will not support different
leaf/node/stripe size per tree, there is no need to store these block
sizes in btrfs_root.
This patch will introduce these block size members into btrfs_fs_info
structure, allowing us to convert such usage in later patches.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Leafsize is deprecated for a long time, and kernel has already updated
ctree.h to rename sb->leafsize to sb->__unused_leafsize.
This patch will remove normal users of leafsize:
1) Remove leafsize member from btrfs_root structure
Now only root->nodesize and root->sectorisze.
No longer root->leafsize.
2) Remove @leafsize parameter from btrfs_setup_root() function
Since no root->leafsize, no need for @leafsize parameter.
The remaining user of leafsize will be:
1) btrfs inspect-internal dump-super
Reformat the "leafsize" output to "leafsize (deprecated)" and
use le32_to_cpu() to do the cast manually.
2) mkfs
We still need to set sb->__unused_leafsize to nodesize.
Do the manual cast too.
3) convert
Same as mkfs, these two superblock setup should be merged later
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
If this flag is passed to open_ctree(), we'll clear the
FREE_SPACE_TREE_VALID compat_ro bit. The kernel will then reconstruct
the free space tree the next time the filesystem is mounted.
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nodesize is used in kernel, the values are always equal. We have to keep
leafsize in headers, similarly the tree setting functions still take and
set leafsize, but it's effectively a no-op.
Signed-off-by: David Sterba <dsterba@suse.com>
This is a same patch as Zach Brown's but we lost so I resend it based on
current code.
- 'commit 2cd95f945a ("fix endian bugs in chunk rebuilding")'
Signed-off-by: Zach Brown <zab@redhat.com>
Signed-off-by: Byongho Lee <bhlee.kernel@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch is generated from a coccinelle semantic patch:
identifier t;
expression e;
statement s;
@@
-t = malloc(e);
+t = calloc(1, e);
(
if (!t) s
|
if (t == NULL) s
|
)
-memset(t, 0, e);
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com>
[squashed patches into one]
Signed-off-by: David Sterba <dsterba@suse.com>
chunk-recover need to use many many time in scan_devices(),
and no output in screen:
# btrfs rescue chunk-recover /dev/sda6
(no output here, but need long time)
To notice user that "the command is not hang", this patch add
dynamic updated stat information in above period:
# btrfs rescue chunk-recover /dev/sda6
Scanning: DONE in dev[0], 19998441472 in dev[1], DONE in dev[2]
(until)
Scanning: DONE in dev0, DONE in dev1, DONE in dev2
Check chunks successfully with no orphans
Recover the chunk tree successfully.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
pthread use void * to save return status, we can use this pointer to
save our return value, but we need to keep the same length.
This patch move to use long type variable to save return value
of our thread, to avoid potential invalid memory access.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
for() is more suitable than while() in this code block.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we go to fixup the dev items after a restore we scan all existing devices.
If you happen to be a btrfs developer you could possibly open up some random
device that you didn't just restore onto, which gives you weird errors and makes
you super cranky and waste a day trying to figure out what is failing. This
will make it so that we use the fd we've already opened for opening our ctree.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
- use standard PACKAGE_{NAME,VERSION,STRING,URL,...} autoconf macros
rather than homemade BTRFS_BUILD_VERSION
- don't #include version.h, now the file is necessary for library API only
Note that "btrfs version" returns "btrfs-progs <version>" instead of
the original confusing "btrfs <version>".
Signed-off-by: Karel Zak <kzak@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
glibc 2.10+ (5+ years old) enables all the desired features:
_XOPEN_SOURCE 700, __XOPEN2K8, POSIX_C_SOURCE, DEFAULT_SOURCE; with a
single _GNU_SOURCE define in the makefile alone. For portability to
other libc implementations (e.g. dietlibc) _XOPEN_SOURCE=700 is also
defined.
This also resolves Debian bug report filed by Michael Tautschnig -
"Inconsistent use of _XOPEN_SOURCE results in conflicting
declarations". Whilst I was not able to reproduce the results, the
reported fact is that _XOPEN_SOURCE set to 500 in one set of files
(e.g. cmds-filesystem.c) generates/defines different struct stat from
other files (cmds-replace.c).
This patch thus cleans up all feature defines, and sets them at a
consistent level.
Bug-Debian: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=747969
Signed-off-by: Dimitri John Ledkov <dimitri.j.ledkov@intel.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Before the patch, chunk will be considered bad if the corresponding
block group is missing, even the only uncertain data is the 'used'
member of the block group.
This patch will try to recalculate the 'used' value of the block group
and rebuild it.
So even only chunk item and dev extent item is found, the chunk can be
recovered.
Although if extent tree is damanged and needed extent item can't be
read, the block group's 'used' value will be the block group length, to
prevent any later write/block reserve damaging the block group.
In that case, we will prompt user and recommend them to use
'--init-extent-tree' to rebuild extent tree if possible.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now commands mentioned below (with in [..]) are calling call register-device
ioctl BTRFS_IOC_SCAN_DEV for all the devices in the system.
Some issues with it:
BTRFS_IOC_SCAN_DEV: ioctl is a write operation, we don't want command like
btrfs-debug-tree threads to do that..
eg:
----
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
$ btrfs-debug-tree /dev/sde (num_device > 1)
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
5
----
btrfs_scan_fs_devices() ends up calling this ioctl only when num_device > 1.
That's inconsistency with in feature/bug.
We don't have to register _all_ the btrfs devices (again) in the system
without user consent.
Why its inconsistent:
function btrfs_scan_fs_devices() calls btrfs_scan_lblkid only when
num_devices is > 1, which in turn calls BTRFS_IOC_SCAN_DEV ioctl, if
conditions are met.
But main issue is we have too many consumers of btrfs_scan_fs_devices()
the names below with in [] is the cli leading to this function.
open_ctree_broken() [btrfs-find-root]
recover_prepare() [btrfs rescue super-recover]
__open_ctree_fd
(updates always except when flag OPEN_CTREE_RECOVER_SUPER is set and
flag OPEN_CTREE_RECOVER_SUPER is set only by 'btrfs rescue super-
recover' but still this thread sneaks through the open_ctree function
to call register-device-ioctl as show below).
open_ctree_fs_info
[btrfs-debug-tree]
[btrfs-image -r]
[btrfs check]
open_fs
[btrfs restore]
open_ctree
[calc-size]
[btrfs-corrupt-block]
[btrfs-image] (create)
[btrfs-map-logical]
[btrfs-select-super]
[btrfstune]
[btrfs-zero-log]
[tester]
[mkfs]
[quick-test.c]
[btrfs label set unmounted]
[btrfs get label unmounted]
[btrfs rescue super-recover]
open_ctree_fd
[btrfs-convert]
Fix:
In an effort to make register-device consistent, all calls to
btrfs_scan_fs_devices() will have 5th parameter set to 0. that means
we don't need 5th parameter at all. And with this function not calling
the register ioctl at all, finally we will have following two cli to call
the ioctl BTRFS_IOC_SCAN_DEV.
btrfs dev scan and
mkfs.btrfs
Threads needing to update kernel about a device would have to use
btrfs_register_one_device() separately.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
chunk-recover.c: In function btrfs_calc_stripe_index
chunk-recover.c:1481: warning: index may be used uninitialized in this function
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
recover_prepare() in chunk-recover.c alloc memory which only contains
sizeof(struct btrfs_super_block). This will cause glibc malloc error
after superblock csum is calculated.
Use BTRFS_SUPER_INFO_SIZE to fix the bug.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Btrfs-progs superblock checksum check is somewhat too restricted for
super-recover, since current btrfs-progs will only read the 1st
superblock and if you need super-recover the 1st superblock is
possibly already damaged.
The fix is introducing super_recover parameter for
btrfs_read_dev_super() and callers to allow scan backup superblocks if
needed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The chunk-recover.c/BTRFS_NUM_MIRRORS in the userspace means
the same thing as ctree.h/BTRFS_MAX_MIRRORS in the kernelspace,
so to stay consistent with the kernelspace, just make this movement
in the userspace:
chunk-recover.c/BTRFS_NUM_MIRRORS
===>
ctree.h/BTRFS_MAX_MIRRORS
This provides convenience for future use.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When run chunk-recover on a health btrfs(data profile raid0, with
plenty of data), the program has a chance to abort on the number
of mirrors of an extent.
According to the kernel code, the max mirror number of an extent
is 3 not 2:
ctree.h: BTRFS_MAX_MIRRORS 3
chunk-recover.c : BTRFS_NUM_MIRRORS 2
just change BTRFS_NUM_MIRRORS to 3, and everything goes well.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When deal with the p & q stripes for data profile raid6, chunk-recover
forgets to insert them into the chunk record. Just insert them back
freely.
Also wrap the insert procedure into a new function, fill_chunk_up.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The 'num_unordered' will be recounted after 'goto out',
just remove it.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If the csum of one stripe is not able to judge the order of two
device extents, the stripe may happen to belong to the device extent
that is already kicked out as ordered.
Take this condition into consideration, don't report failure and
give more tries with the stripes following.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Nikolay Borisov