It's just annoying to have to pass it around everywhere. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
as of now, when 'btrfs device add' adds a device it doesn't
check if the given device contains an existing FS. This
patch will change that to check the same. which when true
add will fail, and ask user to use -f option to overwrite.
further, since now we have test_dev_for_mkfs() function
to check if a disk can be used, so this patch will also
use this function to test the given device before adding.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The sync makes sure that 'very recently' introduced delayed work is
accounted for in the output of 'btrfs subvolume find-new' command.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is a prepatory work for the btrfs fi show command
fixes. So that we have a function get_df to get the fs sizes
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Internally, btrfs_header_fsid() calculates an unsigned long, but casts
it to a pointer, while all callers cast it to unsigned long again.
Committed to btrfs as fba6aa75654394fccf2530041e9451414c28084f
Fix line length issues and match changes to kernelspace
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The 'prealloc' extent_state structure is leaked for the case when the 'desired
range' encapsulates/covers the 'extent range'.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Before I had been dividing by 5 but that gave me too much output so I changed it
to 20 without changing the min seeks test. Fix this to avoid a divide by 0
problem. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The message about trim was printed unconditionally, we should check if
trim is supported at all.
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I've been wanting to get back to the allocator and make some changes to try and
fix our fragmenation woes with lots of metadata. But in order to make these
changes I need to have something to tell me if my changes are making a real
measurable difference. So this patch adds a bunch of new statistics to
btrfs-calc-size. It will tell me how long it took to read in the trees, how
many seeks it had (both forward and backward). It will tell me how far spread
out the tree is and spit out a nice histogram of the seeks. Here is some sample
output
Calculating size of extent tree
Total size: 60.74MB
Inline data: 0.00
Total seeks: 5020
Forward seeks: 3691
Backward seeks: 1329
Avg seek len: 929.53MB
Seek histogram
4096 - 4096: 1043 ####
8192 - 73728: 760 ###
81920 - 52527104: 753 ###
53518336 - 168009728: 753 ###
168591360 - 696045568: 753 ###
696238080 - 7560364032: 753 ###
7560437760 - 8409739264: 178 |
Total clusters: 1874
Avg cluster size: 25.17KB
Min cluster size: 8.00KB
Max cluster size: 472.00KB
Total disk spread: 7.90GB
Total read time: 0 s 341670 us
Levels: 4
This way we can have good numbers to back up any changes we make to the
allocator. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Find the tree id of the containing subvolume for a given file or
directory. For subvolume return it's own id.
$ btrfs inspect-internal rootid <path>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused parameter, 'eb'. Unused since introduction in
7777e63b42
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused eb parameter from btrfs_item_nr, unused since introduced
in 7777e63b42
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Until now if one of device's first superblock is corrupt,btrfs will
fail to mount. Luckily, btrfs have at least two superblocks for
every disk.
In theory, if silent corrupting happens when we are writting superblocks
into disk, we must hold at least one good superblock.
One side effect is that user must gurantee that the disk must be
a btrfs disk. Otherwise, this tool may destroy other fs.(This is also
reason why btrfs only use first superblock in every disk to mount)
This little program will try to correct bad superblocks from
good superblocks with max generation.
There will be five kinds of return values:
0: all supers are valid, no need to recover
1: usage or syntax error
2: recover all bad superblocks successfully
3: fail to recover bad superblocks
4: abort to recover bad superblocks
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If some fatal superblocks are damaged, running ioctl will return failure,
in this case, we should avoid run ioctl.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We don't need to run ioctls when checking whether btrfs
has mounted somewhere.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The devices in 'btrfs filesystem show' are now sorted by the device id,
currently the order was undefined.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The command has been moved and we should rename the files accordingly,
so the entry point is now in cmds-rescue.c and the core functionality
in it's own file.
Return codes of btrfs_recover_chunk_tree have been simplified not to
require a define and another file for defintion.
CC: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Add an empty 1st level command namespace that will collect specialized
recovery tools like chunk-recover, zero-log, select-super and similar.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If there is no balance in progress, resume/pause/cancel
will return 2. Usage or syntax errors will return 1.
And 0 means operations return successfully.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: "Chris West (Faux)" <git@goeswhere.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: "Chris West (Faux)" <git@goeswhere.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user had a corrupt fs where one of his file extents pointed to a completely
bogus disk bytenr. This patch allows us to corrupt a file system in a similar
way in order to test btrfsck. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If you set an file extent item's disk_bytenr to something completely wrong we
won't be able to fix this if it is the only one who has a ref on the original
disk bytenr. Our extent records know exactly who is supposed to point at them,
so if we have an extent record that has no backrefs we can go and try to lookup
the backrefs ourselves. If these backrefs do not point to an extent record that
was actually found then we can be pretty sure this extent record is valid and
the backref is bogus. Then the verify_backref code can do its thing and reset
the backref to point to the right extent record and we can all carry on. This
fixes a user reported corruption. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a problem where he was unable to rmdir an empty directory. This
is because his isize was wrong. This patch will fix this sort of corruption and
allow him to rmdir his directory. Thanks
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a problem with his fs where he had a bogus isize on his
directory. In order to make sure my patch for fsck fixes this properly I needed
to be able to corrupt an inode like this, which is what this patch is for.
Eventually I want to extend this to corrupt everything so we can integrate tests
into btrfs-progs to run btrfsck against to make sure we don't regress on fixing
things with btrfsck. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Raid5 and raid6 at least need three and foure devices respectively,
fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I found that mkfs.btrfs aborts when assigned multi volumes contain
a small volume:
# parted /dev/sdf p
Model: LSI MegaRAID SAS RMB (scsi)
Disk /dev/sdf: 72.8GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 32.3kB 72.4GB 72.4GB primary
2 72.4GB 72.8GB 461MB primary
# ./mkfs.btrfs -f /dev/sdf1 /dev/sdf2
:
SMALL VOLUME: forcing mixed metadata/data groups
adding device /dev/sdf2 id 2
mkfs.btrfs: volumes.c:852: btrfs_alloc_chunk: Assertion `!(ret)' failed.
Aborted (core dumped)
This failure of btrfs_alloc_chunk was caused by following steps:
1) since there is only small space in the small device, mkfs was
going to allocate a chunk from free space as much as available.
So mkfs called btrfs_alloc_chunk with
size = device->total_bytes - device->used_bytes.
2) (According to the comment in source code, to avoid overwriting
superblock,) btrfs_alloc_chunk starts taking chunks at an offset
of 1MB. It means that the layout of a disk will be like:
[[1MB at beginning for sb][allocated chunks]* ... free space ... ]
and you can see that the available free space for allocation is:
avail = device->total_bytes - device->used_bytes - 1MB.
3) Therefore there is only free space 1MB less than requested. damn.
>From further investigations I also found that this issue is easily
reproduced by using -A, --alloc-start option:
# truncate --size=1G testfile
# ./mkfs.btrfs -A900M -f testfile
:
mkfs.btrfs: volumes.c:852: btrfs_alloc_chunk: Assertion `!(ret)' failed.
Aborted (core dumped)
In this case there is only 100MB for allocation but btrfs_alloc_chunk
was going to allocate more than the 100MB.
The root cause of both of above troubles is a same simple bug:
btrfs_chunk_alloc does not calculate available bytes properly even
though it researches how many devices have enough room to have a
chunk to be allocated.
So this patch introduces new function btrfs_device_avail_bytes()
which returns available bytes for allocation in specified device.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The previous patch works fine if the size of specified volume to mkfs
is less than 4MB. However usually btrfs requires more than 4MB to work,
and the minimum preferred size is depending on the raid setting etc.
This patch let mkfs print error message if it cannot allocate one of
chunks should be there at first.
[before]
# truncate --size=4500K testfile
# ./mkfs.btrfs -f testfile
:
SMALL VOLUME: forcing mixed metadata/data groups
mkfs.btrfs: mkfs.c:84: make_root_dir: Assertion `!(ret)' failed.
Aborted (core dumped)
[After]
# truncate --size=4500K testfile
# ./mkfs.btrfs -f testfile
:
SMALL VOLUME: forcing mixed metadata/data groups
no space to alloc data/metadata chunk
failed to setup the root directory
TBD is calculate minimum size for setting and put it in the error
message to let user know how large amount of volume is required.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Eric pointed out that mkfs abort if specified volume is too small:
# truncate --size=2m testfile
# ./mkfs.btrfs testfile
:
SMALL VOLUME: forcing mixed metadata/data groups
mkfs.btrfs: volumes.c:852: btrfs_alloc_chunk: Assertion `!(ret)' failed.
Aborted (core dumped)
As the first step to fix problems around there, let mkfs to report
error if the size of target volume is less than the size of the first
system block group, BTRFS_MKFS_SYSTEM_GROUP_SIZE (= 4MB).
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
As a result of a successful call to btrfs_read_sys_array(), the 'ret'
variable is already set to 0. Hence the function would return 0 even
if the call to read_tree_block() fails.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The strdup()s not freed are reported as memory leaks by valgrind.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Originally the local pending_list is not guaranteed to be freed upon
fails, it should be emptyed and the elements should be freed.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The seen cache_tree in run_next_block freed.
Originally, this "missing" causes memory leaks, reported by valgrind.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The local probe variable in is_ssd() freed upon unsuccessful return;
The local dir_head list in make_image() freed upon unsuccessful return.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The variable "buf" passed into find_collision() as parameter "name"
should be freed on unsuccessful returns.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
There will be four kinds of return value for command "scrub start":
0: scrub dosen't find errors and return success.
1: usage or syntax errors.
3: scrub finds errors and correct all of them.
4: scrub finds errors and some of them are not correctable.
Three kinds of return values for scrub cancel/resume:
0: cancel successfully.
1: usage or syntax errors.
2: cancel a not started or finished scrub.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
There are 3 kinds of return values in replace cancel:
0: cancel successfully.
1: usage or syntal errors
2: cancel a not started or finished replacing operations.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If btrfs send return failure, we return 1，otherwise 0 will be returned.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Josef Bacik