We can set not only btrfs mount point but also any path belong to
btrfs mount point as btrfs-receive's destination.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add new options -q,--quiet to prevent printing messages on stderr, added
--verbose as alternative for -v. Moved 'Mode NO_FILE_DATA enabled'
message to stderr. The default verboisty level is 1 to keep some
backward compatibility.
Signed-off-by: M G Berberich <btrfs@oss.m-berberich.de>
[ minor adjustments in the options, help text and changelog, added
manual page text ]
Signed-off-by: David Sterba <dsterba@suse.com>
A short delay with a warning before starting a full balance should
improve usability. We have been getting reports from people who run full
balance after following some random advice and then get surprised by the
performance impact.
The countdown is done even when run from scripts, but as the whole
balance takes significanly more time, this shouldn't be an issue.
Signed-off-by: David Sterba <dsterba@suse.com>
This patch introduces new option <devid> for the command
btrfs device delete <device_path|devid>[..] <mnt>
In a user reported issue on a 3-disk-RAID1, one disk failed with its
SB unreadable. Now with this patch user will have a choice to delete
the device using devid.
The other method we could do, is to match the input device_path
to the available device_paths with in the kernel. But that won't
work in all the cases, like what if user provided mapper path
when the path within the kernel is a non-mapper path.
This patch depends on the below kernel patch for the new feature to work,
however it will fail-back to the old interface for the kernel without the
patch
Btrfs: Introduce device delete by devid
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For practical purposes teach -t about the human readable names of the
trees in addition to the numerical id. The name syntax is flexible.
Signed-off-by: David Sterba <dsterba@suse.com>
Copy-pasted description found at mkfs.btrfs. I did not bother with
feature list as it seemed to be incomplete.
Signed-off-by: David Sterba <dsterba@suse.com>
Both man btrfs-send(8) and usage message don't describe
btrfs-send needs read-only snapshot as its argument.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs-subvolume(8) is mentioned at "SEE ALSO" section of itself.
Signed-off-by: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no petabyte in the explanation of the suffix of
the size parameter. So, it's added.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Asciidoc ignores special keywords like WARNING or NOTE if they're not at
the beginning of the line and they're not renedered very visibly in the
end.
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs-filesystem(8), improved the documentation of snapshot unaware
defragmentation and included the exact kernel version numbers being affected as
well as the possible effects.
No longer use the word "unlink" which is easily understood as "deleting a file".
Moved the warning more to the beginning of "defragment" subcommand's
documentation where it's more visible to readers.
Added the same warning to the "autodefrag" option of btrfs-mount(5).
Signed-off-by: Christoph Anton Mitterer <mail@christoph.anton.mitterer.name>
Add the overlapping usage and [usage_min, usage_max] members to the
balance args. The min/max values are interpreted iff the corresponding
flag BTRFS_BALANCE_ARGS_USAGE_RANGE is set.
The minimum boundary is inclusive, maximum is exclusive:
* usage_min <= chunk_usage < usage_max
Signed-off-by: David Sterba <dsterba@suse.com>
Add new balance filter 'stripes=<range>' to process only chunks that are
spread accross given number of chunks.
The range minimum and maximum are inclusive.
Signed-off-by: Gabríel Arthúr Pétursson <gabriel@system.is>
[ reworked a bit to use the range helpers, dropped the single value
for stripes ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add the overlapping limit and [limit_min, limit_max] members to the
balance args. The min/max values are interpreted iff the corresponding
flag BTRFS_BALANCE_ARGS_LIMIT_RANGE is set.
The minimum and maximum are inclusive.
Note that the values are only 32bit, but this should be enough for the
foreseeable future.
Signed-off-by: David Sterba <dsterba@suse.com>
* split copies to copies and parity and add a common header for all the
raid options
* add missing RAID1
* n/a were dropped
Based on feedback from Duncan <1i5t5.duncan@cox.net>.
Signed-off-by: David Sterba <dsterba@suse.com>
Add '-s <sb_bytenr>' option to show superblock at given bytenr.
This is very useful to debug non-standard btrfs, like debuging the
1st stage btrfs of btrfs-convert.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ minor updates in docs ]
Signed-off-by: David Sterba <dsterba@suse.com>
When creating small Btrfs filesystem instances (i.e. filesystem size <= 1GiB),
mkfs.btrfs fails if both sectorsize and nodesize are specified on the command
line and sectorsize != nodesize, since mixed block groups involves both data
and metadata blocks sharing the same block group. This is an incorrect behavior
when '-M' option isn't specified on the command line.
This commit makes optional the creation of mixed block groups i.e. Mixed block
groups are created only when -M option is specified on the command line.
Since we now allow small filesystem instances with sectorsize != nodesize to
be created, we can end up in the following situation,
[root@localhost ~]# mkfs.btrfs -f -n 65536 /dev/loop0
btrfs-progs v3.19-rc2-405-g976307c
See http://btrfs.wiki.kernel.org for more information.
Performing full device TRIM (512.00MiB) ...
Label: (null)
UUID: 49fab72e-0c8b-466b-a3ca-d1bfe56475f0
Node size: 65536
Sector size: 4096
Filesystem size: 512.00MiB
Block group profiles:
Data: single 8.00MiB
Metadata: DUP 40.00MiB
System: DUP 12.00MiB
SSD detected: no
Incompat features: extref, skinny-metadata
Number of devices: 1
Devices:
ID SIZE PATH
1 512.00MiB /dev/loop0
[root@localhost ~]# mount /dev/loop0 /mnt/
mount: mount /dev/loop0 on /mnt failed: No space left on device
The ENOSPC occurs during the creation of the UUID tree. This is because of
things like large metadata block size, DUP mode used for metadata and global
reservation consuming space. Also, large nodesize does not make sense on small
filesystems, hence this should not be an issue.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previous patch detecs inconsistency and unconditionally triggers quota
rescan. This may not be always desired as it's a heavy metadata
operation. In case of batch assignments it's better to trigger the
rescan at the end.
Signed-off-by: David Sterba <dsterba@suse.com>
Previously in 'filesystem resize get_min_size', now
'inspect-internal min-dev-size'. We'd like to avoid cluttering the
'resize' syntax further.
The test has been updated to exercise the new option.
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there is not way for a user to know what is the minimum size a
device of a btrfs filesystem can be resized to. Sometimes the value of
total allocated space (sum of all allocated chunks/device extents), which
can be parsed from 'btrfs filesystem show' and 'btrfs filesystem usage',
works as the minimum size, but sometimes it does not, namely when device
extents have to relocated to holes (unallocated space) within the new
size of the device (the total allocated space sum).
This change adds the ability to reliably compute such minimum value and
extents 'btrfs filesystem resize' with the following syntax to get such
value:
btrfs filesystem resize [devid:]get_min_size
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Man manual need to be updated since RAID5/6 has been supported
by btrfs-replace.
Signed-off-by: Wang Yanfeng <wangyf-fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's an awkward asymmetry between btrfs device add and btrfs device
delete. Resolve this by aliasing delete to remove.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
So far the subvol sync command takes a shortcut and looks if there are
any deleted subvols at all. It does not print the deleted subvolumes as
they get cleaned. Arguably this is what the user would like to see and
has to do
$ btrfs subvol sync /path $(btrfs subvol list -d /path | "extract the ids")
to see the progress.
Make it look for all currently deleted subvolumes automatically and
print the progress as if the ids were listed manually.
This is a slight change in the semantics of the command. Previously, any
new subvol deletion would prevent subvol sync to return. To simulate the
old behaviour, run 'subvol sync' in a loop until it returns 0.
Signed-off-by: David Sterba <dsterba@suse.cz>
Add option to silecne mkfs and print only errors, warnings or info on
user request like features or help.
Based on patch from Goffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: David Sterba <dsterba@suse.cz>
In a chroot environment we may not have /proc mounted, which makes btrfs receive
freak out since it wants to know the base directory where are are mounted for
things like clone and such. Give an option to specify where the mountpoint is
in these cases so you can still do a btrfs receive in a chroot. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
[added manpage documentation]
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch forces btrfs receive to issue chroot before
parsing the btrfs stream using command-line flag -C
to confine the process and minimize damage that could
be done via malicious btrfs stream.
Signed-off-by: Lauri Võsandi <lauri.vosandi@gmail.com>
[added long option variant, added docs]
Signed-off-by: David Sterba <dsterba@suse.cz>
Copy the functionality of standalone btrfs-zero-log to the main tool.
Delete man page for btrfs-zero-log and copy the relevant parts into
btrfs-rescue(8). The standalone utility will be removed later.
Signed-off-by: David Sterba <dsterba@suse.cz>
Resize of a filesystem image does not work as expected. This has been
confusing and can have bad consequences as people have reported,
resizing the wrong filesystem.
Signed-off-by: David Sterba <dsterba@suse.cz>
A few minor benefits:
* editors set highliting according to the extensions
* web access to the git repository (github) renders the .asciidoc
files:
* we can link to them from the wiki
* the files are editable via browser and such editations can be
submitted for merge easily
Signed-off-by: David Sterba <dsterba@suse.cz>
Although btrfs-convert can rollback converted btrfs, it still has some
limitation to ensure rollback.
Add a warning on the limitations.
Also add a note for users who decides to go on with btrfs and don't need
the rollback ability.
Reported-by: Vytautas D <vytdau@gmail.com>
Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We provided format <path>|<device> in command line.
But btrfs device stats doesn't work if device is not mounted.
Also fix some tailing whitespace.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Allow btrfs-convert to use nodesizes other than 4096. It defaults to
max(16384, pagesize), like mkfs.
Signed-off-by: Sebastian Thorarensen <sebth@naju.se>
Signed-off-by: David Sterba <dsterba@suse.cz>
With progress turned on by default we should be able to disable it
as well.
Reported-by: Jérôme Poulin <jeromepoulin@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Satoru Takeuchi