Add 3 new helpers:
* is_block_device(), to test if a path is a block device.
* get_btrfs_mount(), to get the mountpoint of a device,
if mounted.
* open_path_or_dev_mnt(path), to open either the pathname
or, if it's a mounted btrfs dev, the mountpoint. Useful
for some commands which can take either type of arg.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Allocate fs_info::super_copy dynamically of full BTRFS_SUPER_INFO_SIZE
and use it directly for saving superblock to disk.
This fixes incorrect superblock checksum after mkfs.
Signed-off-by: David Sterba <dsterba@suse.cz>
Clean btrfslabel.[c|h] out of the source tree and move those related
functions to utils.[c|h].
CC: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Refactor check_label().
- Make it be static at first, this is a preparation step since we'll remove
btrfslabel.[c|h] and move those functions from there to utils.[c|h], we can
do pre-checking against the input label string with it.
- Fix the label length check up from BTRFS_LABEL_SIZE to BTRFS_LABEL_SIZE - 1.
- Kill the check of label contains an invalid character, see below commits for detail:
79e0e445fc
btrfs-progs: kill check for /'s in labels.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
CC: David Sterba <dsterba@suse.cz>
CC: Gene Czarcinski <gene@czarc.net>
Currently, the following commands succeed.
# cat /proc/swaps
Filename Type Size Used Priority
/dev/sda3 partition 8388604 0 -1
/dev/sdc8 partition 9765884 0 -2
# mkfs.btrfs /dev/sdc8
WARNING! - Btrfs v0.20-rc1-165-g82ac345 IS EXPERIMENTAL
WARNING! - see http://btrfs.wiki.kernel.org before using
fs created label (null) on /dev/sdc8
nodesize 4096 leafsize 4096 sectorsize 4096 size 9.31GB
Btrfs v0.20-rc1-165-g82ac345
# btrfs fi sh /dev/sdc8
Label: none uuid: fc0bdbd0-7eed-460f-b4e9-131273b66df2
Total devices 1 FS bytes used 28.00KB
devid 1 size 9.31GB used 989.62MB path /dev/sdc8
Btrfs v0.20-rc1-165-g82ac345
#
But we should check out the swap device. Fixed it.
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
print more informative error when we fail to open a device
If open() fails, we should let the user know why it failed.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Gene Czarcinski <gene@czarc.net>
In the places where we copy a string into the name
member of btrfs_ioctl_vol_args or btrfs_ioctl_vol_args_v2,
we use strncopy (to not overflow the name array) and then
set the last position to the null character.
Howver, in both cases the arrays are defined with:
char name[MAX+1];
hence the last array position is name[MAX].
In most cases, we now insert the null at name[MAX-1]
which deprives us of one useful character.
Even the above isn't consistent through the code, so
make some helper code to make it simple, i.e.
strncpy_null(dest, src) which automatically does the
right thing based on the size of dest.
Thanks to Zach Brown for the macro suggestion.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
btrfs_scan_one_dir() can overflow an arbitrarily small 256 byte buffer
with an arbitrarily slightly larger 1024 byte buffer as it remembers the
path of a dir to later descend.
Make these buffers the same size to stop the overflow and chose PATH_MAX
for that size so that it won't fail on legitimately bonkers paths.
Signed-off-by: Zach Brown <zab@redhat.com>
The super block magic is a le64 whose value looks like an unterminated
string in memory. The lack of null termination leads to clumsy use of
string functions and causes static analysis tools to warn that the
string will be unterminated.
So let's just treat it as the le64 that it is. Endian wrappers are used
on the constant so that they're compiled into run-time constants.
Signed-off-by: Zach Brown <zab@redhat.com>
Two convenient utility functions that have so far been local to scrub are
moved to utils.c.
They will be used in the device stats code in a following commit.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
The definition of the function open_file_or_dir() is moved from common.c
to utils.c in order to be able to share some common code between scrub
and the device stats in the following step. That common code uses
open_file_or_dir(). Since open_file_or_dir() makes use of the function
dirfd(3), the required XOPEN version was raised from 6 to 7.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Original-Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
The LOOP_GET_STATUS ioctl truncates filenames to 64 characters. We should get
the backing file for a given loop device from /sys/. This is how losetup does it
as well.
Signed-off-by: Nirbheek Chauhan <nirbheek.chauhan@collabora.co.uk>
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Tested-By: Hector Oron <hector.oron@collabora.co.uk>
Ignore the error ENXIO (device don't exists) and ENOMEDIUM (
No medium found -> like a cd tray empty) in the function
btrfs_scan_one_dir.
This avoids spurios errors due to an empty CD or a block device node
without a device (which is frequent in a static /dev).
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Add new suffixes in parse_size() function. New suffixes are: T as
terabyte, P as petabyte, E as exabyte. Note these units are
multiply of 2 .
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
Replace the function atoll with strtoull(); Check that the suffix for the
parse_size() input is of only one character.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
My patch
04609add88
introduced a regression where if you mkfs'ed a group of disks with different
sizes it limited the disks to the size of the first one that is specified.
This was not the intent of my patch, I only want it to limit the size based
on the -b option, so I've reworked the code to pass in a max block count and
that fixes the issue. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
I had a test that creates a 7gig raid1 device but it was ending up wonky
because the second device that gets added is the full size of the disk
instead of the limited size. So enforce the limited size on all disks
passed in at mkfs time, otherwise our threshold calculations end up wonky
when doing chunk allocations. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
If we iterate the "goto again" loop, we've called "closedir(dirp)",
yet at the top of the loop, upon malloc failure we "goto fail",
where we test dirp and if non-NULL, call closedir(dirp) again.
* utils.c (btrfs_scan_one_dir): Clear "dirp" after closedir to avoid
use-after-free upon failed fullpath = malloc(...
Signed-off-by: Jim Meyering <meyering@redhat.com>
When we're using multipath or raid0, it is possible
that btrfs dev scan will find one of the component devices
instead of the proper virtual device the kernel creates.
We want to make sure the kernel scans the virtual devices last,
since it always remembers the last device it finds with a given fsid.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
btrfs_scan_for_fsid is used by open_ctree and by mkfs when it is
checking for mounted devices. It currently scans all of /dev,
which is rarely the right answer.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
/proc/mounts contains device names that don't exist,
we end up erroring out because we're not able to stat
the device (that doesn't exist).
Fix this by allowing the mkfs when the target device doesn't exist.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
During the commands:
- btrfs filesystem show
- btrfs device scan
the devices "scanned" are extracted from /proc/partitions. This
should avoid to scan devices not suitable for a btrfs filesystem like cdrom
and floppy or to scan not existant devices.
The old behavior (scan all the block devices under /dev) may be
forced passing the "--all-devices" switch.
new version of check_mounted() returning more information gathered while
searching. check_mounted() is now a wrapper for check_mounted_where(). the
new version is needed by scrub.c
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
we discovered speed setting is (probably unintentionally) initialized to 1 in make_btrfs(), while being initialized to 0 in btrfs_add_to_fsid(). initialization in make_btrfs() is due to reuse of buf after pwrite() without clearing it. consequently, code like
btrfs_set_extent_generation(buf, extent_item, 1);
writes to the same location in buf where speed will be placed, later. It may be a good idea to clear buf after each pwrite(), though leaving the struct btrfs_header intact.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
This patch adds the setting of time to the root directory to the
mkfs.btrfs command.
As a result, the time of the mount point not correctly displayed
comes to be displayed correctly.
[before]
# mkfs.btrfs /dev/sdd10
# mount /dev/sdd10 /test1
# ls -ld /test1
dr-xr-xr-x 1 root root 0 Jan 1 1970 /test1
[after]
# date
Tue Nov 16 18:06:05 JST 2010
# mkfs.btrfs /dev/sdd10
# mount /dev/sdd10 /test1
# ls -ld /test1
dr-xr-xr-x 1 root root 0 Nov 16 18:06 /test1
Thanks,
Tsutomu
Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Hugo Mills <hugo@carfax.org.uk>
Discard the whole device before starting to create the filesystem structures.
Modelled after similar support in mkfs.xfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Hi all,
this patch adds the command "btrfs filesystem label" to change (or show) the
label of a filesystem.
This patch is a subset of the one written previously by Morey Roof. I
included the user space part only. So it is possible only to change/show a
label of a *single device* and *unounted* filesystem.
The reason of excluding the kernel space part, is to simplify the patch in
order to speed the check and then the merging of the patch itself. In fact I
have to point out that in the past there was almost three attempts to propose
this patch, without success neither complaints.
Chris, let me know how you want to proceed. I know that you are very busy,
and you prefer to work to stabilize btrfs instead adding new feature. But I
think that changing a label is a *essential* feature for a filesystem
managing tool. Think about a mount by LABEL.
To show a label
$ btrfs filesystem label <device>
To set a label
$ btrfs filesystem label <device> <newlabel>
Please guys, give a look to the source.
Comments are welcome.
You can pull the source from the branch "label" of the repository
http://cassiopea.homelinux.net/git/btrfs-progs-unstable.git
Regards
G.Baroncelli
Signed-off-by: Chris Mason <chris.mason@oracle.com>
So alot of crazy people (I'm looking at you Meego) want to use btrfs on phones
and such with small devices. Unfortunately the way we split out metadata/data
chunks it makes space usage inefficient for volumes that are smaller than
1gigabyte. So add a -M option for mixing metadata+data, and default to this
mixed mode if the filesystem is less than or equal to 1 gigabyte. I've tested
this with xfstests on a 100mb filesystem and everything is a-ok.
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch updates the super field to add the cache_generation member. It also
makes us set it to -1 on mkfs so any new filesystem will get the space cache
stuff turned on. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Hi Chris,
below is enclosed a trivial patch, which has the aim to improve the error
reporting of the "btrfs" command.
You can pull from
http://cassiopea.homelinux.net/git/btrfs-progs-unstable.git
branch
strerror
I changed every printf("some-error") to something like:
e = errno;
fprintf(stderr, "ERROR: .... - %s", strerror(e));
so:
1) all the error are reported to standard error
2) At the end of the message is printed the error as returned by the system.
The change is quite simple, I replaced every printf("some-error") to the line
above. I don't touched anything other.
I also integrated a missing "printf" on the basis of the Ben patch.
This patch leads the btrfs command to be more "user friendly" :-)
Regards
G.Baroncelli
btrfs-list.c | 40 ++++++++++++++++++++++--------
btrfs_cmds.c | 77 ++++++++++++++++++++++++++++++++++++++++-----------------
utils.c | 6 ++++
3 files changed, 89 insertions(+), 34 deletions(-)
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Check_mount() should also work with multi device filesystems.
This patch adds checks that allow to detect if a file is a device
file used by a mounted single or multi device btrfs or if it is a
regular file used by a loopback device that is part of a mounted
single or multi device btrfs.
The single device checks also work for non-btrfs filesystems.
This might be helpful to prevent users from running btrfs programs
(e.g. mkfs.btrfs) accidentally on a filesystem used somewhere else.
Signed-off-by: Andi Drebes <lists-receive@programmierforen.de>
This commit introduces a new kind of back reference for btrfs metadata.
Once a filesystem has been mounted with this commit, IT WILL NO LONGER
BE MOUNTABLE BY OLDER KERNELS.
The new back ref provides information about pointer's key, level and in which
tree the pointer lives. This information allow us to find the pointer by
searching the tree. The shortcoming of the new back ref is that it only works
for pointers in tree blocks referenced by their owner trees.
This is mostly a problem for snapshots, where resolving one of these fuzzy back
references would be O(number_of_snapshots) and quite slow. The solution used
here is to use the fuzzy back references in the common case where a given tree
block is only referenced by one root, and use the full back references when
multiple roots have a reference
The structure used to send device in btrfs ioctl calls was not
properly aligned, and so 32 bit ioctls would not work properly on
64 bit kernels.
We could fix this with compat ioctls, but we're just one byte away
and it doesn't make sense at this stage to carry about the compat ioctls
forever at this stage in the project.
This patch brings the ioctl arg up to an evenly aligned 4k.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
brfsctl -a will do nothing and no error is output
if btrfs.ko is not inserted.
Since no caller do error processing for btrfs_register_one_device,
make its return void and do error processing inside.
Signed-off-by: Shen Feng <shen@cn.fujitsu.com>
This patch updates the ext3 to btrfs converter for the new
disk format. This mainly involves changing the convert's
data relocation and free space management code. This patch
also ports some functions from kernel module to btrfs-progs.
Thank you,
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
This patch updates btrfs-progs for superblock duplication.
Note: I didn't make this patch as complete as the one for
kernel since updating the converter requires changing the
code again. Thank you,
Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
Eric Sandeen