btrfs-progs can't mount space_cache=v2 filesystems read-write, which is
why the compat bit wasn't added to the supported mask in the first
place. Remove it.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The filesystem existence on a device is manifested by the signature,
during the mkfs process we write it first and then create other
structures. Such filesystem is not valid and should not be registered
during device scan nor listed among devices from blkid.
This patch will introduce two staged creation. In the first phase, the
signature is wrong, but recognized as a partially created filesystem (by
open or scan helpers). Once we successfully create and write everything,
we fixup the signature. At this point automated scanning should find
a valid filesystem on all devices.
We can also rely on the partially created filesystem to do better error
handling during creation. We can just bail out and do not need to clean
up.
The partial signature is '!BHRfS_M', can be shown by
btrfs inspect-internal dump-super -F image
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the superblock is created first, with a valid signaure, but
the rest of the filesystem is missing. When the creation process is
interrupted, the filesystem still might be considered as valid.
To prevent that, create the filesytem with an invalid signature that
would be still recognized during the mkfs process, and finalize at the
end.
Signed-off-by: David Sterba <dsterba@suse.com>
The new convert treats the convert image as a normal file, without any
special flags and permissions.
This is different from original code:
1) Permission changed from 0400 to 0600
2) Inode lacks READONLY flag
This makes we can read-write mount the ext2 image and cause rollback
failure.
Follow old code behavior, use 0400 permission and add back READONLY
flag to fix it.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function check_data_extent_item() to check if the
corresponding data backref exists in extent tree.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we can verify all qgroups, we can write the corrected qgroups out
to disk when '--repair' is specified. The qgroup status item is also updated
to clear any out-of-date state. The repair_ functions were modeled after the
inode repair code in cmds-check.c.
I also renamed the 'scan' member of qgroup_status_item to 'rescan' in order
to keep consistency with the kernel.
Testing this was easy, I just reproduced qgroup inconsistencies via the
usual routes and had btrfsck fix them.
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanup all the old btrfs-convert facilities, including:
1) btrfs_convert_operations->alloc/free/test_extents*
No need to do non-standard extent allocation.
After init_btrfs() everything can be done by normal routine.
Now only 4 functions are needed in btrfs_convert_operations.
1) open_fs
2) read_used_space
3) copy_inodes
4) close_fs
2) fs_info->extent_ops
Same as above.
3) Old init_btrfs(), create_image(), create_file_image_range()
Replaced with newer and cleaner one.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before this patch, btrfs-convert only rely on large enough initial
system/metadata chunk size to ensure no newer system/meta chunk will be
created.
But that's not safe enough. So add two new members in fs_info,
avoid_sys/meta_chunk_alloc flags to prevent any newer system or meta
chunks to be created before init_btrfs_v2().
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs_record_file_extent() has some small problems like:
1) Can't handle overlapping extents
2) May create extent larger than BTRFS_MAX_EXTENT_SIZE
So enhance it using previously added facilites.
This is used for later btrfs-convert, as for new convert, we create
saved image first, then copy inode.
Which will also cause extent overlapping.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new function, btrfs_search_overlap_extent() to find the first
overlapping extent.
It's useful for later btrfs-convert rework.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The search header is usually accessed in an unaligned way, we could
trigger errors (SIGBUS) on architectures that do not support that.
Signed-off-by: David Sterba <dsterba@suse.com>
Nodesize is used in kernel, the values are always equal. We have to keep
leafsize in headers, similarly the tree setting functions still take and
set leafsize, but it's effectively a no-op.
Signed-off-by: David Sterba <dsterba@suse.com>
Current open_ctree_fs_info() won't return anything if chunk tree root is
corrupted.
This makes some function, like btrfs-find-root, unable to find any older
chunk tree root, even it is possible to use system_chunk_array in super
block.
And at least two users in mail list has reported such heavily chunk
corruption.
Although we have 'btrfs rescue chunk-recovery' but it's too time
consuming and sometimes not able to cope with a specific filesystem
corruption.
This patch adds a new open ctree flag,
OPEN_CTREE_IGNORE_CHUNK_TREE_ERROR, allowing fs_info to be returned from
open_ctree_fs_info() even there is no valid tree root in it.
Also adds a new close_ctree() variant, close_ctree_fs_info() to handle
possible fs_info without any root.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[ adjusted error messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
The BTRFS_FEATURE_COMPAT_RO_FREE_SPACE_TREE bit is supposed to be in the
COMPAT_RO_SUPP bitmask.
Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reuses the existing code for checking the free space cache, we just
need to load the free space tree. While we do that, we check a couple of
invariants on the free space tree itself. This requires pulling in some
code from the kernel to exclude the super stripes.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To start, let's tell btrfs-progs to read the free space root and how to
print the on-disk format of the free space tree. However, we're not
adding the FREE_SPACE_TREE read-only compat bit to the set of supported
bits because progs doesn't know how to keep the free space tree
consistent.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The sequence, transid and reserved fields of inode were writen to disk
with uninitizlized value, this patch fixes it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
s/generation/sequence/
for BTRFS_SETGET_STACK_FUNCS(stack_inode_sequence, ...)
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As convert implement its own alloc extent, avoid such metadata problem
too.
Reported-by: Chris Murphy <lists@colorremedies.com>
Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there is not way for a user to know what is the minimum size a
device of a btrfs filesystem can be resized to. Sometimes the value of
total allocated space (sum of all allocated chunks/device extents), which
can be parsed from 'btrfs filesystem show' and 'btrfs filesystem usage',
works as the minimum size, but sometimes it does not, namely when device
extents have to relocated to holes (unallocated space) within the new
size of the device (the total allocated space sum).
This change adds the ability to reliably compute such minimum value and
extents 'btrfs filesystem resize' with the following syntax to get such
value:
btrfs filesystem resize [devid:]get_min_size
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function will be used to free a empty chunk.
This provides the basis for later temp chunk cleanup.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current btrfs only support CRC32 as checksum algorithm.
But in btrfs_csum_sizes array, we have an extra 0 at tail, causing
csum_type 1 can still be considered as supported csum type.
Fix it by removing the tailing 0.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This function is used to change fsid and chunk_tree_uuid of a node/leaf.
The function does it without transaction protection.
This is the basis of offline uuid change.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Now open_ctree will exit if it found the superblock is marked
CHANGING_FSID, except given IGNORE_FSID open ctree flags.
Kernel will do the same thing later.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[removed the chunk tree flag, reworded the error message]
Signed-off-by: David Sterba <dsterba@suse.cz>
Add the super flag to inform kernel not to mount a filesystem wich fsid
change is in progress.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[removed the chunk tree flag]
Signed-off-by: David Sterba <dsterba@suse.cz>
We have this check in the kernel but not in userspace, which makes fsck
fail when we wouldn't have a problem in the kernel. This was meant to
catch this case because it really isn't good, unfortunately it will
require a design change to fix in the kernel so in the meantime add this
check so we can be sure our tests only catch real problems. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This provides the basis for later qgroup related changes.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Ctree.h of btrfs-progs contains wrong flags for btrfs_qgroup_status.
Update it with the one in kernel.
Also, introduce the inline function btrfs_qgroup_(level/subvid) to get
the level/subvolid of qgroup, to replace the old open-coded bit
operations.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add new open ctree flag OPEN_CTREE_SUPPRESS_CHECK_BLOCK_ERRORS to
suppress tree block csum error output.
Provides the basis for new btrfs-find-root and other enhancement on
btrfs offline tools output.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
[renamed vars and funcs, added comments]
Signed-off-by: David Sterba <dsterba@suse.cz>
We hold a transaction open for the entirety of fixing extent refs. This works
out ok most of the time but we can be tight on space and run out of space when
fixing things. To get around this just push down the transaction starting dance
into the functions that actually fix things. This keeps us from ending up with
ENOSPC because we pinned everything and allows the code to be a bit simpler.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
The METADUMP super flag makes us skip doing the chunk tree reading which isn't
helpful for the new restore since we have a valid chunk tree. But we still want
to have a way for the kernel to know that this is a metadump restore so it
doesn't do things like verify data checksums. We also want to skip some of the
device extent checks in fsck since those will obviously not match. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Add btrfs_get_extent() and btrfs_punch_hole() for btrfs-progs.
Btrfs_get_extent() will act much like kernel one, return the first
extent that covers the given range.
The difference will be that progs btrfs_get_extent() can't handle
no-holes feature, which means caller should handle it carefully.
Btrfs_punch_hole() will punch a hole in given range of given inode,
however it differs from kernel one since it won't zero any page or drop
any extents if there is any extent in the hole range.
These functions are mainly used for later I_ERR_FILE_EXTENT_DISCOUNT
repair function.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Before this patch, when a extent's data ref points to a invalid key in
fs tree, this happens if a leaf/node of fs tree is corrupted, btrfsck
can't do any repair and just exit.
In fact, such problem can be handled in fs tree repair routines, rebuild
the inode item(if missing) and add back the extent data (with some
assumption).
So this patch records such data extent refs for later fs tree recovery
routine.
TODO:
Restore orphan data extent refs into btrfs_root is not the best
method. It's best to directly restore it into inode_record, however
current extent tree and fs tree can't cooperate together, so use
btrfs_root as a temporary storage until inode_cache is built.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add a basic inode item rebuild function for I_ERR_NO_INODE_ITEM.
The main use case is to repair btrfs which fs root has corrupted leaf,
but it is already working for case if the corrupteed fs root leaf/node
contains no inode extent_data.
The repair needs 3 elements for inode rebuild:
1. inode number
This is quite easy, existing inode_record codes will detect it quite
well.
2. inode type
This is the trick part. The only reliable method is to recovery it from
parent's dir_index/item.
The remaining method will search for regular file extent for FILE
type or child's backref for DIR(todo).
Fallback will be FILE.
Inode name(inode_ref) will be recoverd by nlink repair function.
This is just a fundamental implement, some advanced recovery can be
improved later with btrfs-progs infrastructure change.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
With the previous btrfs inode operations patches, now we can use
btrfs_mkdir() to create the 'lost+found' dir to do some data salvage in
btrfsck.
This patch along with previous ones will make data salvage easier.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Add btrfs_unlink() and btrfs_add_link() functions in inode.c,
for the incoming btrfs_mkdir() and later inode operations functions.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Import lookup/del_inode_ref() function in inode-item.c, as base functions
for the incoming btrfs_add_link() and btrfs_unlink() functions.
Also modify btrfs_insert_inode_ref() and split_leaf() making them able
to deal with EXTENT_IREF incompat flag.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Import btrfs_insert/del/lookup_extref() functions form kernel for the
incoming btrfs_add_link() and btrfs_unlink() functions.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Enhance the command "btrfs filesystem df" to show space usage information
for a mount point(s). It shows also an estimation of the space available,
on the basis of the current one used.
Signed-off-by: Goffredo Baroncelli <kreijack@inwind.it>
[code moved under #if 0 instead of deletion]
Signed-off-by: David Sterba <dsterba@suse.cz>
We may run across dir indexes that are corrupt in such a way that it makes them
useless, such as having a bad location key or a bad name. In this case we can
just delete dir indexes that don't show up properly and then re-create what we
need. When we delete dir indexes however we need to restart scanning the fs
tree as we could have greated bogus inode recs if the location key was bad, so
set it up so that if we had to delete an dir index we go ahead and free up our
inode recs and return -EAGAIN to check_fs_roots so it knows to restart the loop.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch pulls back backref.c, adds a couple of helpers everywhere that it
needs, and cleans up backref.c to fit in btrfs-progs. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
[removed free_some_buffers after "do not reclaim extent buffer"]
Signed-off-by: David Sterba <dsterba@suse.cz>
Kernels >= 3.15 export the global block reserve as a space info presented
by 'btrfs fi df' but would display 'unknown' instead of some meaningful
string.
Signed-off-by: David Sterba <dsterba@suse.cz>
The three flags of @btrfs_path:
btrfs_path {
unsigned int keep_locks:1;
unsigned int skip_locking:1;
unsigned int leave_spinning:1;
}
have little meaning, because the userspace @btrfs_search_slot()
is free of locking and no other routines will decide their behavior
on these. So just remove them.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The chunk-recover.c/BTRFS_NUM_MIRRORS in the userspace means
the same thing as ctree.h/BTRFS_MAX_MIRRORS in the kernelspace,
so to stay consistent with the kernelspace, just make this movement
in the userspace:
chunk-recover.c/BTRFS_NUM_MIRRORS
===>
ctree.h/BTRFS_MAX_MIRRORS
This provides convenience for future use.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
David Sterba