When using btrfs check with -s option, if using '-s 2' on a small
device which doesn't have the third superblock, "No valid Btrfs found"
will be output, but it is not appropriate.
So check sb_bytenr against device size before scanning a device and
output proper error message.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We were failing to fsck a volume because we couldn't open the log tree, which is
not helpful. Make us skip erroring out if we are using OPEN_CTREE_PARTIAL since
it isn't a mandatory tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_scan_lblikd() is called by most the device related command functions.
And btrfs_scan_lblkid() is most expensive function and it becomes more expensive
as number of devices in the system increase. Further some threads call this
function more than once for absolutely no extra benefit and the real waste of
resources. Below list of threads and number of times btrfs_scan_lblkid()
is called in that thread.
btrfs-find-root 1
btrfs rescue super-recover 2
btrfs-debug-tree 1
btrfs-image -r 2
btrfs check 2
btrfs restore 2
calc-size NC
btrfs-corrupt-block NC
btrfs-image NC
btrfs-map-logical 1
btrfs-select-super NC
btrfstune 2
btrfs-zero-log NC
tester NC
quick-test.c NC
btrfs-convert 0
mkfs #number of devices to be mkfs
btrfs label set unmounted 2
btrfs get label unmounted 2
This patch will:
move out calling register_one_device with in btrfs_scan_lblkid()
and so function setting the BTRFS_UPDATE_KERNEL to yes will
call btrfs_register_all_devices() separately.
introduce a global variable scan_done, which is set when scan is
done succssfully per thread. So that following calls to this function
will just return success.
Further if any function needs to force scan after scan_done is set,
then it can be done when there is such a requirement, but as of now there
isn't any such requirement.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
btrfs_setup_all_roots() had some copy and pasted code for trying to
setup a root and then creating a blank node if that failed. The copy
for the csum_root created the blank node in the extent_root.
So we create a function to use a consistent root.
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
This change adds code to detect and fix the issue introduced in the kernel
release 3.17, where creation of read-only snapshots lead to a corrupted
filesystem if they were created at a moment when the source subvolume/snapshot
had orphan items. The issue was that the on-disk root items became incorrect,
referring to the pre orphan cleanup root node instead of the post orphan
cleanup root node.
A test filesystem can be generated with the test case recently submitted for
xfstests/fstests, which is essencially the following (bash script):
workout()
{
ops=$1
procs=$2
num_snapshots=$3
_scratch_mkfs >> $seqres.full 2>&1
_scratch_mount
snapshot_cmd="$BTRFS_UTIL_PROG subvolume snapshot -r $SCRATCH_MNT"
snapshot_cmd="$snapshot_cmd $SCRATCH_MNT/snap_\`date +'%H_%M_%S_%N'\`"
run_check $FSSTRESS_PROG -p $procs \
-x "$snapshot_cmd" -X $num_snapshots -d $SCRATCH_MNT -n $ops
}
ops=10000
procs=4
snapshots=500
workout $ops $procs $snapshots
Example of btrfsck's (btrfs check) behaviour against such filesystem:
$ btrfsck /dev/loop0
root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Found 7 roots with an outdated root item.
Please run a filesystem check with the option --repair to fix them.
$ echo $?
1
$ btrfsck --repair /dev/loop0
enabling repair mode
fixing root item for root 311, current bytenr 44630016, current gen 60, current level 1, new bytenr 44957696, new gen 61, new level 1
fixing root item for root 1480, current bytenr 1003569152, current gen 1271, current level 1, new bytenr 1004175360, new gen 1272, new level 1
fixing root item for root 1509, current bytenr 1037434880, current gen 1300, current level 1, new bytenr 1038467072, new gen 1301, new level 1
fixing root item for root 1562, current bytenr 33636352, current gen 1354, current level 1, new bytenr 34455552, new gen 1355, new level 1
fixing root item for root 3094, current bytenr 1011712000, current gen 2935, current level 1, new bytenr 1008484352, new gen 2936, new level 1
fixing root item for root 3716, current bytenr 80805888, current gen 3578, current level 1, new bytenr 73515008, new gen 3579, new level 1
fixing root item for root 4085, current bytenr 714031104, current gen 3958, current level 1, new bytenr 716816384, new gen 3959, new level 1
Fixed 7 roots.
Checking filesystem on /dev/loop0
UUID: 2186e9b9-c977-4a35-9c7b-69c6609d4620
checking extents
checking free space cache
cache and super generation don't match, space cache will be invalidated
checking fs roots
checking csums
checking root refs
found 618537000 bytes used err is 0
total csum bytes: 130824
total tree bytes: 601620480
total fs tree bytes: 580288512
total extent tree bytes: 18464768
btree space waste bytes: 136939144
file data blocks allocated: 34150318080
referenced 27815415808
Btrfs v3.17-rc3-2-gbbe1dd8
$ echo $?
0
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
As of now commands mentioned below (with in [..]) are calling call register-device
ioctl BTRFS_IOC_SCAN_DEV for all the devices in the system.
Some issues with it:
BTRFS_IOC_SCAN_DEV: ioctl is a write operation, we don't want command like
btrfs-debug-tree threads to do that..
eg:
----
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
0
$ btrfs-debug-tree /dev/sde (num_device > 1)
$ cat /proc/fs/btrfs/devlist | egrep fsid | wc -l
5
----
btrfs_scan_fs_devices() ends up calling this ioctl only when num_device > 1.
That's inconsistency with in feature/bug.
We don't have to register _all_ the btrfs devices (again) in the system
without user consent.
Why its inconsistent:
function btrfs_scan_fs_devices() calls btrfs_scan_lblkid only when
num_devices is > 1, which in turn calls BTRFS_IOC_SCAN_DEV ioctl, if
conditions are met.
But main issue is we have too many consumers of btrfs_scan_fs_devices()
the names below with in [] is the cli leading to this function.
open_ctree_broken() [btrfs-find-root]
recover_prepare() [btrfs rescue super-recover]
__open_ctree_fd
(updates always except when flag OPEN_CTREE_RECOVER_SUPER is set and
flag OPEN_CTREE_RECOVER_SUPER is set only by 'btrfs rescue super-
recover' but still this thread sneaks through the open_ctree function
to call register-device-ioctl as show below).
open_ctree_fs_info
[btrfs-debug-tree]
[btrfs-image -r]
[btrfs check]
open_fs
[btrfs restore]
open_ctree
[calc-size]
[btrfs-corrupt-block]
[btrfs-image] (create)
[btrfs-map-logical]
[btrfs-select-super]
[btrfstune]
[btrfs-zero-log]
[tester]
[mkfs]
[quick-test.c]
[btrfs label set unmounted]
[btrfs get label unmounted]
[btrfs rescue super-recover]
open_ctree_fd
[btrfs-convert]
Fix:
In an effort to make register-device consistent, all calls to
btrfs_scan_fs_devices() will have 5th parameter set to 0. that means
we don't need 5th parameter at all. And with this function not calling
the register ioctl at all, finally we will have following two cli to call
the ioctl BTRFS_IOC_SCAN_DEV.
btrfs dev scan and
mkfs.btrfs
Threads needing to update kernel about a device would have to use
btrfs_register_one_device() separately.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
These were added to deal with duplicated functionality within btrfs-progs, but
we specifically copied rbtree.c from the kernel, so move these functions out
into their own file. This will make it easier to keep rbtree.c in sync. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If checksum root is corrupted, fsck will get segmentation. This
is because if we fail to load checksum root, root's node is NULL which
cause NULL pointer deferences later.
To fix this problem, we just did something like extent tree rebuilding.
Allocate a new one and clear uptodate flag. We will do sanity check
before fsck going on.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If btrfs tree root is corrupted, fsck will hit the following segmentation.
enabling repair mode
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
Check tree block failed, want=29376512, have=0
read block failed check_tree_block
Couldn't read tree root
Checking filesystem on /dev/sda9
UUID: 0e1a754d-04a5-4256-ae79-0f769751803e
Critical roots corrupted, unable to fsck the FS
Segmentation fault (core dumped)
In btrfs_setup_all_roots(), we could tolerate some trees(extent tree, csum tree)
corrupted, and we have did careful check inside that function, it will
return NULL if critial roots corrupt(for example tree root).
The problem is that we check @OPEN_CTREE_PARTIAL flag again after
calling btrfs_setup_all_roots() which will successfully return
@fs_info though critial roots corrupted.
Fix this problem by removing @OPEN_CTREE_PARTIAL flag check outsize
btrfs_setup_all_roots().
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
The libblkid scan method which was introduced later, will also
scan devices under /proc/partitions. So we don't have to do
the explicit scan of the same.
Remove the scan method BTRFS_SCAN_PROC.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
If we didn't find what we are looking for in /proc/partitions,
we're not going to find it by scanning every node under /dev, either.
But that's just what btrfs_scan_for_fsid() does.
Remove that fallback; at that point btrfs_scan_for_fsid() just calls
scan_for_btrfs(), so remove the wrapper & call it directly.
Side note: so, these paths always use /proc/partitions, not libblkid.
Userspace-intiated scans default to libblkid. I presume this is
part of the design, and intentional? Anyway, not changing it now!
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
We use the read extent buffer infrastructure to read the super block when we are
creating a btrfs-image. This works out fine most of the time except when the fs
has been balanced, then it fails to map the super block. So we could fix
btrfs-image to read in the super in a special way, but thats more code. So
instead just check in the eb reading code if we are reading the super and then
don't bother mapping the block, just read the actual offset. This fixed some
poor guy who was trying to btrfs-image his fs that had been balanced. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
David sent a quick patch that removed a BUG_ON(). I took a peek and
found that the function was already leaking an eb ref and only returned
0. So this fixes the leak and makes the function void and fixes up the
callers.
Accidentally-motivated-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Zach Brown <zab@zabbo.net>
Signed-off-by: David Sterba <dsterba@suse.cz>
Btrfs-progs superblock checksum check is somewhat too restricted for
super-recover, since current btrfs-progs will only read the 1st
superblock and if you need super-recover the 1st superblock is
possibly already damaged.
The fix is introducing super_recover parameter for
btrfs_read_dev_super() and callers to allow scan backup superblocks if
needed.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When encountering a corrupted fs root node, fsck hit following message:
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
Check tree block failed, want=29360128, have=0
read block failed check_tree_block
Checking filesystem on /dev/sda9
UUID: 0d295d80-bae2-45f2-a106-120dbfd0e173
checking extents
Segmentation fault (core dumped)
This is because in btrfs_setup_all_roots(), we check
btrfs_read_fs_root() return value by verifing whether it is
NULL pointer, this is wrong since btrfs_read_fs_root() return
PTR_ERR(ret), fix it.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
This patch adds functionality (in qgroup-verify.c) to compute bytecounts in
subvolume quota groups. The original groups are read in and stored in memory
so that after we compute our own bytecounts, we can compare them with those
on disk. A print function is provided to do this comparison and show the
results on the console.
A 'qgroup check' pass is added to btrfsck. If any subvolume quota groups
differ from what we compute, the differences for them are printed. We also
provide an option '--qgroup-report' which will run only the quota check code
and print a report on all quota groups. Other than making it possible to
verify that our qgroup changes work correctly, this mode can also be used in
xfstests for automated checking after qgroup tests.
This patch does not address the following:
- compressed counts are identical to non compressed, because kernel doesn't
make the distinction yet. Adding the code to verify compressed counts
shouldn't be hard at all though once kernel can do this.
- It is only concerned with subvolume quota groups (like most of
btrfs-progs).
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: David Sterba <dsterba@suse.cz>
Fix double free of memory if btrfs_open_devices fails:
*** Error in `btrfs': double free or corruption (fasttop): 0x000000000066e020 ***
Crash happened because when open failed on device inside
btrfs_open_devices it freed all memory by calling btrfs_close_devices but
inside disk-io.c we call btrfs_close_again it again.
Signed-off-by: Rakesh Pandit <rakesh@tuxera.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
When a disk containing btrfs is overwritten with other FS, ext4
for example it doesn't overwrite 2nd and 3rd copy of the btrfs SB.
And btrfs_read_dev_super() would look for backup SB when primary
SB isn't found. This causes the problem as in the reproducer below.
In kernel we avoid this by _not_ reading backup SB implicitly,
this patch would port the same to btrfs-progs.
reproducer:
mkfs.btrfs /dev/sde
mkfs.ext4 /dev/sde
mount /dev/sde /ext4
btrfs-convert /dev/sde (is successful (bug))
with this patch
::
btrfs-convert /dev/sde
/dev/sde is mounted
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
If we are cycling through all of the mirrors trying to find the best one we need
to make sure we set best_mirror to an actual mirror number and not 0. Otherwise
we could end up reading a mirror that wasn't the best and make everybody sad.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Currently, as of 8cae1840af when running
btrfs-convert I get a bus error.
The problem is that struct btrfs_key has __attribute__ ((__packed__))
so it is not aligned. Then, a pointer to it's objectid field is taken,
cast to a void*, then eventually cast back to a u64* and
dereferenced. The problem is that the dereferenced u64* is not
necessarily aligned (ie, not necessarily a valid u64*), resulting in
undefined behavior.
This patch adds a local u64 variable which would of course be properly
aligned and then uses a pointer to that.
I did not modify the call from btrfs_fs_roots_compare_roots as that
uses struct btrfs_root which is a regular struct and would thus have
it's members correctly aligned to begin with.
After patching this I realized Liu Bo had already written a similar
patch, but I think mine is cleaner, so I'm sending it anyway.
Signed-off-by: Ivan Jager <aij+@mrph.org>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
this patch will make btrfsck operations to open disk in exclusive mode,
so that mount will fail when btrfsck is running
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The following steps could trigger btrfs segfault:
mkfs -t btrfs -m raid5 -d raid5 /dev/loop{0..3}
losetup -d /dev/loop2
btrfs check /dev/loop0
The reason is that read_tree_block() returns NULL and
add_root_to_pending() dereferences it without checking it first.
Also replace a BUG_ON with proper error checking.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Internally, btrfs_header_chunk_tree_uuid() calculates an unsigned
long, but casts it to a pointer, while all callers cast it to unsigned
long again.
From btrfs commit b308bc2f05a86e728bd035e21a4974acd05f4d1e
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Unfortunately you can't run --init-extent-tree if you can't actually read the
extent root. Fix this by allowing partial starts with no extent root and then
have fsck only check to see if the extent root is uptodate _after_ the check to
see if we are init'ing the extent tree. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
So I needed to add a flag to not try to read block groups when doing
--init-extent-tree since we could hang there, but that meant adding a whole
other 0/1 type flag to open_ctree_fs_info. So instead I've converted it all
over to using a flags setting and added the flag that I needed. This has been
tested with xfstests and make test. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In some cases the tree root is so hosed we can't get anything useful out of it.
So add the -b option to btrfsck to make us look for the most recent backup tree
root to use for repair. Then we can hopefully get ourselves into a working
state. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
mkfs -r wasn't creating chunks properly, making it very difficult to
allocate space for anything except tiny filesystems.
This changes it around to use more of the generic infrastructure, and
to do actual logical->physical block number translation.
It also allocates space to the files in smaller extents (max 1MB), which
keeps the allocator from trying to allocate an extent bigger than a
single chunk.
It doesn't quite support multi-device mkfs -r yet, but is much closer.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user was reporting an issue with bad transid errors on his blocks. The thing
is that btrfs-progs will ignore transid failures for things like restore and
fsck so we can do a best effort to fix a users file system. So fsck can put
together a coherent view of the file system with stale blocks. So if everything
else is ok in the mind of fsck then we can recow these blocks to fix the
generation and the user can get their file system back. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Internally, btrfs_header_fsid() calculates an unsigned long, but casts
it to a pointer, while all callers cast it to unsigned long again.
Committed to btrfs as fba6aa75654394fccf2530041e9451414c28084f
Fix line length issues and match changes to kernelspace
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Remove unused parameter, 'eb'. Unused since introduction in
7777e63b42
Signed-off-by: Ross Kirk <ross.kirk@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Until now if one of device's first superblock is corrupt,btrfs will
fail to mount. Luckily, btrfs have at least two superblocks for
every disk.
In theory, if silent corrupting happens when we are writting superblocks
into disk, we must hold at least one good superblock.
One side effect is that user must gurantee that the disk must be
a btrfs disk. Otherwise, this tool may destroy other fs.(This is also
reason why btrfs only use first superblock in every disk to mount)
This little program will try to correct bad superblocks from
good superblocks with max generation.
There will be five kinds of return values:
0: all supers are valid, no need to recover
1: usage or syntax error
2: recover all bad superblocks successfully
3: fail to recover bad superblocks
4: abort to recover bad superblocks
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
If some fatal superblocks are damaged, running ioctl will return failure,
in this case, we should avoid run ioctl.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
As a result of a successful call to btrfs_read_sys_array(), the 'ret'
variable is already set to 0. Hence the function would return 0 even
if the call to read_tree_block() fails.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In files copied from the kernel, mark many functions as static,
and remove any resulting dead code.
Some functions are left unmarked if they aren't static in the
kernel tree.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Port of commit b3b4aa7 to userspace.
parameter tree root it's not used since commit
5f39d397dfbe140a14edecd4e73c34ce23c4f9ee ("Btrfs: Create extent_buffer
interface for large blocksizes")
This gets userspace a tad closer to kernelspace by removing
this unused parameter that was all over the codebase...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
For most time, In open_ctree_*(), we use the first superblock
(BTRFS_SUPER_INFO_OFFSET). However, for btrfs-convert, we don't,
we should pass the correct sb_bytenr to btrfs_scan_fs_devices() rather
than always use BTRFS_SUPER_INFO_OFFSET.This patch fix the following
regression:
mkfs.ext2 <dev>
btrfs-convert <dev>
warning, device 1 is missing
Check tree block failed, want=2670592, have=0
read block failed check_tree_block
Couldn't read chunk root
Segmentation fault (core dumped)
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_scan_for_fsid uses only one argument run_ioctl out of 3
so remove the rest two of them
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.
Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header and
btrfs_super.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This adds a 'btrfs-image -m' option, which let us restore an image that
is built from a btrfs of multiple disks onto several disks altogether.
This aims to address the following case,
$ mkfs.btrfs -m raid0 sda sdb
$ btrfs-image sda image.file
$ btrfs-image -r image.file sdc
---------
so we can only restore metadata onto sdc, and another thing is we can
only mount sdc with degraded mode as we don't provide informations of
another disk. And, it's built as RAID0 and we have only one disk,
so after mount sdc we'll get into readonly mode.
This is just annoying for people(like me) who're trying to restore image
but turn to find they cannot make it work.
So this'll make your life easier, just tap
$ btrfs-image -m image.file sdc sdd
---------
then you get everything about metadata done, the same offset with that of
the originals(of course, you need offer enough disk size, at least the disk
size of the original disks).
Besides, this also works with raid5 and raid6 metadata image.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Otherwise we will access illegal addresses while searching on fs_uuid list.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Add chunk-recover program to check or rebuild chunk tree when the system
chunk array or chunk tree is broken.
Due to the importance of the system chunk array and chunk tree, if one of
them is broken, the whole btrfs will be broken even other data are OK.
But we have some hint(fsid, checksum...) to salvage the old metadata.
So this function will first scan the whole file system and collect the
needed data(chunk/block group/dev extent), and check for the references
between them. If the references are OK, the chunk tree can be rebuilt and
luckily the file system will be mountable.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Because the fs/file roots are not extents, so it is better to use rb-tree
to manage them. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In fact, the code of many rb-tree insert/search/delete functions is similar,
so we can abstract them, and implement common functions for rb-tree, and then
simplify them.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some commands(such as btrfs-convert) access the devices again after we close
the ctree, so it is better that we don't free the devices objects when the ctree
is closed, or we need re-allocate the memory for the devices. We needn't worry
the memory leak problem, because all the memory will be freed after the taskes
die.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
As we know, the file descriptor 0 is a special number, so we shouldn't
use it to initialize the file descriptor of the devices, or we might
close this special file descriptor by mistake when we close the devices.
"-1" is a better choice.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Qu Wenruo