The test misc-tests/035-receive-common-mount-point-prefix does another
mount inside TEST_MNT but current 'make test-clean' will not properly
undo the nested mount and this will break subsequent tests. The
recursive unmount can handle that.
Signed-off-by: David Sterba <dsterba@suse.com>
The temporary files are not accessible if the testsuite is hosted on
NFS, pre-create them and allow writes.
Signed-off-by: David Sterba <dsterba@suse.com>
The image has one free space cache inode with invalid mode (0).
item 9 key (256 INODE_ITEM 0) itemoff 13702 itemsize 160
generation 30 transid 30 size 65536 nbytes 1507328
block group 0 mode 0 links 1 uid 0 gid 0 rdev 0
sequence 23 flags 0x1b(NODATASUM|NODATACOW|NOCOMPRESS|PREALLOC)
atime 0.0 (1970-01-01 08:00:00)
ctime 1553491158.189771625 (2019-03-25 13:19:18)
mtime 0.0 (1970-01-01 08:00:00)
otime 0.0 (1970-01-01 08:00:00)
Both lowmem and original mode should be able to detect and fix it.
The extracted test image is pretty big (1G extracted), as kernel won't
cache small chunks.
Even with SSD, such test may still take some seconds just extracting the
image.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Lowmem can repair after commit
'btrfs-progs: lowmem: move nbytes check before isize check',
so add the beacon file.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
The missing extent will lead to the existence of the gap between adjacent
extents. The fsck should can detect the gap correctly and repair by punch
a hole.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Add a test for a scenario that used to fail due to find_mount_root()
incorrectly determining the mount point for the receive path due to the
fact that a different mount point with a path that is a prefix of the
receive path exists.
This is fixed by a recent patch titled:
"Btrfs-progs: fix mount point detection due to partial prefix match"
Reported-by: David Disseldorp <ddiss@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[ adjustments to make the test work when hosted on NFS ]
Signed-off-by: David Sterba <dsterba@suse.com>
The runtime of the test is over 4 minutes when hosted on NFS, the
fallocate phase takes the most time. As fallocate can't take multiple
arguments, we can't save the overhead by creating the files at once.
Create the files in batches in the background, this improves the runtime
to 2 minutes.
Signed-off-by: David Sterba <dsterba@suse.com>
Now two locations can detect such problem, either by device item
used/total bytes check, or by early dev extents check against device
boundary.
The image is hand-crafted image which uses DATA SINGLE chunk to feed
btrfs check. As expected, as long as block group item, chunk item,
device used bytes match, older versions check can't detect such problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a bunch of tests exercising the new btrfstune functionality. In
particular check that various restrictions are implemented correctly,
test that btrfs-image works as expected and also test the output of
btrfs inspect-internal dump-super is correct.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Test case misc/021 is testing if we could mount a single disk btrfs
image recovered from multi disk fs.
The problem is, current kernel has extra check for block group, chunk
and dev extent. This means no image can pass btrfs check for chunk
tree and the filesystem will not mount.
So do extra btrfs check before mount, this will also help us to locate
the problem in btrfs-image easier.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For reloc tree, despite of its short lifespan, it's still the backref,
where reloc tree root backref points back to itself, makes it special.
So it's more approriate to put them into 020-extent-ref-cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Total of three conditions are tested. One for short name, one with
name length 255, the last one with more than 255.
This case should pass after commit
'btrfs-progs: change filename limit to 255 when creating subvolume'.
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Simple test case which preps a filesystem, then corrupts the FST and
finally repairs it. Tests both extent based and bitmap based FSTs.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a test which ensures the kernel returns the correct error value
when missing device removal is requested. This test verifies that kernel
refactoring didn't break the return value.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit d99615284a ("btrfs-progs:
fsck-tests: Add test image to check if btrfs check reports uninitialized
rescan as error") added test 035, should have been 036.
Signed-off-by: David Sterba <dsterba@suse.com>
For trees have been balanced, leaves are with flag BTRFS_HEADER_FLAG_RELOC and
extent data backrefs are shared. Like:
=====================
item 0 key (11927552 EXTENT_ITEM 524288) itemoff 3932 itemsize 63
refs 129 gen 7 flags DATA
shared data backref parent 35897344 count 41
shared data backref parent 35426304 count 37
shared data backref parent 35422208 count 51
=====================
Then make the leaf which owns the extent data cowed. The shared data
backref was to transferred to keyed data ref, but remaining backrefs are
still shared. Like:
=====================
item 0 key (11927552 EXTENT_ITEM 524288) itemoff 3887 itemsize 108
refs 129 gen 7 flags DATA
extent data backref root 5 objectid 258 offset 0 count 40
extent data backref root 5 objectid 257 offset 0 count 1
shared data backref parent 35426304 count 37
shared data backref parent 35422208 count 51
=====================
However lowmem mode used to iterate the whole inode to find all
references, and doesn't care if a reference is already counted by the
shared tree block.
Add the test case to check it.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fuzzed image will not only cause kernel BUG_ON(), but also btrfs
check BUG_ON() for original mode.
Checking filesystem on /home/adam/btrfs/crafted_images/runtime/0.img
UUID: 3381d111-94a3-4ac7-8f39-611bbbdab7e6
checking extents
check/main.c:3677: check_owner_ref: BUG_ON `rec->is_root` triggered, value 1
btrfs(+0x572c2)[0x562d65da72c2]
btrfs(+0x6098d)[0x562d65db098d]
btrfs(+0x60bb6)[0x562d65db0bb6]
btrfs(+0x6179b)[0x562d65db179b]
btrfs(cmd_check+0x1199)[0x562d65db5589]
btrfs(main+0x88)[0x562d65d62768]
/usr/lib/libc.so.6(__libc_start_main+0xeb)[0x7f4fcbb1b06b]
btrfs(_start+0x2a)[0x562d65d6288a]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200403
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Test misc/029 only works if the test case is executed as root, while for
sudo usage, it doesn't work as initial mkdir and final cleanup doesn't
use $SUDO_HELPER.
Add "run_check $SUDO_HELPER" for such cases to allow it works under sudo
usage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The restore target file does not exist and creating by root does not
work on NFS, so precreating will make that work. Also fix the image name
to be deleted.
Signed-off-by: David Sterba <dsterba@suse.com>
There are two bad symlinks in the test case. One is with immutable
attribute. Another one is with append attribute.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This tests is most similar to xfstests generic/405.
It calls device mapper to create a thin provision device with small
backing size and big virtual size. mkfs.btrfs should fail on such
devices.
This test should pass after commit e805b143a4fe
("btrfs-progs: mkfs: return nozero value on thin provisioned device").
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Verify that if we have an otherwise clean filesystem, containging
collided DIR_ITEM, btrfs check lowmem's mode can correctly handle those
and not produce any false positives.
This if fixed by commit titled:
"btrfs-progs: check: fix DIR_ITEM checking in lowmem"
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the test case uses run_mustfail(), which is pretty easy pass due to
other unexpected problems, so here an extra run_check() is added to
ensure we don't only report qgroup error, but also fix it without
problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit aaf2dac5ef ("btrfs-progs: qgroup: split update_qgroup to
reduce arguments") cause qgroup show to output the wrong qgroup
parent-child relationship, in addition to fixing the problem, a test case
is needed to prevent the similar problem in the future.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new image misses one extent which leads lowmem mode to allocate new
chunks in repair.
Rename original image to no_extent_bad_dev.img.
Because of its bad used bytes, it should let lowmem mode
exclude blocks in repair.
Due to problems of btrfs-image, choose xz as compression tool.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Its function has been subsumed by "btrfs rescue zero-log". Remove its
source file and adjust make/tests soruces accordingly.
Deprecated since 4.0.
Issue: #97
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a test case for mkfs --rootdir, using files with different file
sizes to check if invalid large inline extent could exist.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Verify that a filesystem check operation (fsck) does not report the
following scenario as an error:
An extent is shared between two inodes, as a result of clone/reflink
operation, and for one of the inodes, lets call it inode A, the extent is
referenced through a file extent item as a prealloc extent, while for the
other inode, call it inode B, the extent is referenced through a regular
file extent item, that is, it was written to. The goal of this test is to
make sure a filesystem check operation will not report "odd csum items"
errors for the prealloc extent at inode A, because this scenario is valid
since the extent was written through inode B and therefore it is expected
to have checksum items in the filesystem's checksum btree for that shared
extent.
Such scenario can be created with the following steps for example:
mkfs.btrfs -f /dev/sdb
mount /dev/sdb /mnt
touch /mnt/foo
xfs_io -c "falloc 0 256K" /mnt/foo
sync
xfs_io -c "pwrite -S 0xab 0 256K" /mnt/foo
touch /mnt/bar
xfs_io -c "reflink /mnt/foo 0 0 256K" /mnt/bar
xfs_io -c "fsync" /mnt/bar
<power fail>
mount /dev/sdb /mnt
umount /mnt
This scenario is fixed by the following patch for the filesystem checker:
"Btrfs-progs: check, fix false error reports for shared prealloc extents"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit cebf3b3722 ("btrfs-progs: introduce TEST_TOP and
INTERNAL_BIN for tests") did not convert all test paths. This would
break the exported testsutie.
Signed-off-by: David Sterba <dsterba@suse.com>
Regression test for false alerts in lowmem mode.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update test ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add the testcase for false alert of data extent backref lost with the
extent offset.
The image can be reproduced by the following commands:
------
dev=~/test.img
mnt=/mnt/btrfs
umount $mnt &> /dev/null
fallocate -l 128M $dev
mkfs.btrfs $dev
mount $dev $mnt
for i in `seq 1 10`; do
xfs_io -f -c "pwrite 0 2K" $mnt/file$i
done
xfs_io -f -c "falloc 0 64K" $mnt/file11
for i in `seq 1 32`; do
xfs_io -f -c "reflink $mnt/file11 0 $(($i * 64))K 64K" $mnt/file11
done
xfs_io -f -c "reflink $mnt/file11 32K $((33 * 64))K 32K" $mnt/file11
btrfs subvolume snapshot $mnt $mnt/snap1
umount $mnt
btrfs-image -c9 $dev extent_data_ref.img
------
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make the TOP variable more configurable, allow to set it to any path
where to find binaries when the testsuite is exported, or fallback to
system binaries.
There's now more code duplication, the logic is now more complex so it's
left open coded for clarity. Further cleanups are possible.
Signed-off-by: David Sterba <dsterba@suse.com>
Use TEST_TOP as base for tests to reference any files, this will be used
for git and external testsuite.
INTERNAL_BIN is needed for referencing binaries that could reside in
different paths in git vs external testsuite.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
[ add quotes around sourced files, update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Move the testsuite to tests/ and make the tarball generation more
deterministic. As there could be many random temporary files left in the
test directories, we can't just copy them. Use 'git ls-tree' to
filter just what we want, this needs a slight extension of the file list
specification.
Signed-off-by: David Sterba <dsterba@suse.com>
Export the testsuite files to a separate tar. Since fsck tests depend
on btrfs-corrupt-block, and misc tests depends on both
btrfs-corrupt-block and fssum, so set it as prerequisites for package
commad.
Because, althougth fssum can be generated by source that are all in
tests directory, and has no rely on the btrfs's structure. But
btrfs-corrupt-block deeply relys on btrfs's structure. For consistency,
at the present stage, generete the two when create test tar.
Signed-off-by: Gu Jinxiang <gujx@cn.fujitsu.com>
[ applied without changes, the generated tarball will be different from
the one after the follow up commits ]
Signed-off-by: David Sterba <dsterba@suse.com>
There are 2 fsck tests with the same number 027:
tree-reloc-tree
bad-extent-inline-ref-type
And we also have a hole in 015, so just rename tree-reloc-tree to 015,
to get rid of the duplicated test number and fill in the hole.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The run_check_umount_test_dev umounts the TEST_DEV and also optionally
uses the arguments but this would not work as expected if the TEST_DEV
is not a vald path for umount (eg. a restored image).
Update the helper so it tries to umount all paths, or fallback to
TEST_DEV to keep the current behaviour.
Signed-off-by: David Sterba <dsterba@suse.com>
Node sizes larger than 16k will fail due to enospc in the mount test.
This is likely caused by the kernel. Keep the condition only local to
travis so any other testing environment could see the failure
eventually.
Signed-off-by: David Sterba <dsterba@suse.com>
As btrfs is specific to Linux, %m can be used instead of strerror(errno)
in format strings. This has some size reduction benefits for embedded
systems.
glibc, musl, and uclibc-ng all support %m as a modifier to printf.
A quick glance at the BIONIC libc source indicates that it has
support for %m as well. BSDs and Windows do not but I do believe
them to be beyond the scope of btrfs-progs.
Compiled sizes on Ubuntu 16.04:
Before:
3916512 btrfs
233688 libbtrfs.so.0.1
4899 bcp
2367672 btrfs-convert
2208488 btrfs-corrupt-block
13302 btrfs-debugfs
2152160 btrfs-debug-tree
2136024 btrfs-find-root
2287592 btrfs-image
2144600 btrfs-map-logical
2130760 btrfs-select-super
2152608 btrfstune
2131760 btrfs-zero-log
2277752 mkfs.btrfs
9166 show-blocks
After:
3908744 btrfs
233256 libbtrfs.so.0.1
4899 bcp
2366560 btrfs-convert
2207432 btrfs-corrupt-block
13302 btrfs-debugfs
2151104 btrfs-debug-tree
2134968 btrfs-find-root
2281864 btrfs-image
2143536 btrfs-map-logical
2129704 btrfs-select-super
2151552 btrfstune
2130696 btrfs-zero-log
2276272 mkfs.btrfs
9166 show-blocks
Total savings: 23928 (24 kilo)bytes
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use the prepare_test_dev helper to make sure the image has at least
this size. The "at least" part is not desired by some tests as the
device might be larger than the test expects.
Signed-off-by: David Sterba <dsterba@suse.com>
Though the newly added mkfs profiles should not be affected, let's add
the remaining valid single device profiles for better coverage.
Signed-off-by: David Sterba <dsterba@suse.com>
Add test case to check if the first device extent is occupying reserved
0~1M range.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Transform the test to the common helpers and don't manage the loop
devices here. The test category changes from check to misc.
Signed-off-by: David Sterba <dsterba@suse.com>
This functionality regressed some time ago and it was never caught. Seems no
one complained of that, but to be sure add a regression test to prevent future
regressions.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To test regression 460e93f25754 ("btrfs-progs: mkfs: check the status of
file at mkfs").
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update test to create a out of /tmp ]
Signed-off-by: David Sterba <dsterba@suse.com>
New test case to test if the minimal device size given by "mkfs.btrfs"
failure case is valid.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ renamed script ]
Signed-off-by: David Sterba <dsterba@suse.com>
So prepare_test_dev() can be called several times in one test case, to
test different device sizes.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ switch to [ ] ]
Signed-off-by: David Sterba <dsterba@suse.com>
With extended tests in the following patch a file based filesystem image
also needs -f, otherwise it will fail.
Signed-off-by: David Sterba <dsterba@suse.com>
Reloc tree is a special tree with very short life span. It acts as a
special snapshot for any tree, with related nodes/leaves or EXTENT_DATA
modified to point to new position.
Considering the short life span and its special purpose, it should be
quite reasonable to keep them as both corner case for fsck and
educational dump for anyone interested in relocation.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For snapshot shared tree blocks with source subvolume, the keyed backref
counter only counts the exclusive owned references.
In the following case, 258 is a snapshot of 257, which inherits all the
reference to this data extent.
------
item 4 key (12582912 EXTENT_ITEM 524288) itemoff 3741 itemsize 140
refs 179 gen 9 flags DATA
extent data backref root 257 objectid 258 offset 0 count 49
extent data backref root 257 objectid 257 offset 0 count 1
extent data backref root 256 objectid 258 offset 0 count 128
extent data backref root 256 objectid 257 offset 0 count 1
------
However lowmem mode used to iterate the whole inode to find all
references, and doesn't care if a reference is already counted by the
shared tree block.
Add the test case to check it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The image is dumped by modifying kernel to sleep long enough before
merging relocation trees, so we can just copy the whole image to other
place before kernel begins to merge reloc trees.
And the base image is created by the following script to bump metadata
size:
------
dev=~/test.img
mnt=/mnt/btrfs
umount $mnt &> /dev/null
fallocate -l 128M $dev
mkfs.btrfs -f -n 4k -m single -d single $dev
mount $dev $mnt -o nospace_cache,max_inline=2048
btrfs subvolume create $mnt/src
for i in $(seq -w 0 128); do
xfs_io -f -c "pwrite 0 2k" $mnt/src/file_$i > /dev/null
done
for i in $(seq -w 0 64); do
btrfs subvolume snapshot $mnt/src/ $mnt/snapshot_$i
touch $mnt/snapshot_$i/new
done
sync
------
The image triggers several corner cases that the old lowmem mode didn't
consider.
Like metadata backref with FULL_BACKREF flag and only SHARED_BLOCK_REF
backrefs for metadata. And several tree reloc trees with shared
leaves/nodes to confuse old lowmem mode.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a new test image, which has an extent item with no inlined
extent data ref, but all keyed extent data ref.
Only in this case we can trigger fase data extent backref lost bug in
lowmem mode.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a image which can reproduce the extent item referencer count
mismatch false alert for lowmem mode.
Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a image that the inlined extent coexist with the regular extent.
Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba