diff --git a/tests/sha-private.h b/tests/sha-private.h new file mode 100644 index 00000000..6e9c4520 --- /dev/null +++ b/tests/sha-private.h @@ -0,0 +1,28 @@ +/************************ sha-private.h ************************/ +/***************** See RFC 6234 for details. *******************/ +#ifndef _SHA_PRIVATE__H +#define _SHA_PRIVATE__H +/* + * These definitions are defined in FIPS 180-3, section 4.1. + * Ch() and Maj() are defined identically in sections 4.1.1, + * 4.1.2, and 4.1.3. + * + * The definitions used in FIPS 180-3 are as follows: + */ + +#ifndef USE_MODIFIED_MACROS +#define SHA_Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) +#define SHA_Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) +#else /* USE_MODIFIED_MACROS */ +/* + * The following definitions are equivalent and potentially faster. + */ + +#define SHA_Ch(x, y, z) (((x) & ((y) ^ (z))) ^ (z)) +#define SHA_Maj(x, y, z) (((x) & ((y) | (z))) | ((y) & (z))) + +#endif /* USE_MODIFIED_MACROS */ + +#define SHA_Parity(x, y, z) ((x) ^ (y) ^ (z)) + +#endif /* _SHA_PRIVATE__H */ diff --git a/tests/sha.h b/tests/sha.h new file mode 100644 index 00000000..1ffd6880 --- /dev/null +++ b/tests/sha.h @@ -0,0 +1,356 @@ +/**************************** sha.h ****************************/ +/***************** See RFC 6234 for details. *******************/ +/* + Copyright (c) 2011 IETF Trust and the persons identified as + authors of the code. All rights reserved. + + Redistribution and use in source and binary forms, with or + without modification, are permitted provided that the following + conditions are met: + + - Redistributions of source code must retain the above + copyright notice, this list of conditions and + the following disclaimer. + + - Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following + disclaimer in the documentation and/or other materials provided + with the distribution. + + - Neither the name of Internet Society, IETF or IETF Trust, nor + the names of specific contributors, may be used to endorse or + promote products derived from this software without specific + prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ +#ifndef _SHA_H_ +#define _SHA_H_ + +/* + * Description: + * This file implements the Secure Hash Algorithms + * as defined in the U.S. National Institute of Standards + * and Technology Federal Information Processing Standards + * Publication (FIPS PUB) 180-3 published in October 2008 + * and formerly defined in its predecessors, FIPS PUB 180-1 + * and FIP PUB 180-2. + * + * A combined document showing all algorithms is available at + * http://csrc.nist.gov/publications/fips/ + * fips180-3/fips180-3_final.pdf + * + * The five hashes are defined in these sizes: + * SHA-1 20 byte / 160 bit + * SHA-224 28 byte / 224 bit + * SHA-256 32 byte / 256 bit + * SHA-384 48 byte / 384 bit + * SHA-512 64 byte / 512 bit + * + * Compilation Note: + * These files may be compiled with two options: + * USE_32BIT_ONLY - use 32-bit arithmetic only, for systems + * without 64-bit integers + * + * USE_MODIFIED_MACROS - use alternate form of the SHA_Ch() + * and SHA_Maj() macros that are equivalent + * and potentially faster on many systems + * + */ + +#include +/* + * If you do not have the ISO standard stdint.h header file, then you + * must typedef the following: + * name meaning + * uint64_t unsigned 64-bit integer + * uint32_t unsigned 32-bit integer + * uint8_t unsigned 8-bit integer (i.e., unsigned char) + * int_least16_t integer of >= 16 bits + * + * See stdint-example.h + */ + +#ifndef _SHA_enum_ +#define _SHA_enum_ +/* + * All SHA functions return one of these values. + */ +enum { + shaSuccess = 0, + shaNull, /* Null pointer parameter */ + shaInputTooLong, /* input data too long */ + shaStateError, /* called Input after FinalBits or Result */ + shaBadParam /* passed a bad parameter */ +}; +#endif /* _SHA_enum_ */ + +/* + * These constants hold size information for each of the SHA + * hashing operations + */ +enum { + SHA1_Message_Block_Size = 64, SHA224_Message_Block_Size = 64, + SHA256_Message_Block_Size = 64, SHA384_Message_Block_Size = 128, + SHA512_Message_Block_Size = 128, + USHA_Max_Message_Block_Size = SHA512_Message_Block_Size, + + SHA1HashSize = 20, SHA224HashSize = 28, SHA256HashSize = 32, + SHA384HashSize = 48, SHA512HashSize = 64, + USHAMaxHashSize = SHA512HashSize, + + SHA1HashSizeBits = 160, SHA224HashSizeBits = 224, + SHA256HashSizeBits = 256, SHA384HashSizeBits = 384, + SHA512HashSizeBits = 512, USHAMaxHashSizeBits = SHA512HashSizeBits +}; + +/* + * These constants are used in the USHA (Unified SHA) functions. + */ +typedef enum SHAversion { + SHA1, SHA224, SHA256, SHA384, SHA512 +} SHAversion; + +/* + * This structure will hold context information for the SHA-1 + * hashing operation. + */ +typedef struct SHA1Context { + uint32_t Intermediate_Hash[SHA1HashSize/4]; /* Message Digest */ + + uint32_t Length_High; /* Message length in bits */ + uint32_t Length_Low; /* Message length in bits */ + + int_least16_t Message_Block_Index; /* Message_Block array index */ + /* 512-bit message blocks */ + uint8_t Message_Block[SHA1_Message_Block_Size]; + + int Computed; /* Is the hash computed? */ + int Corrupted; /* Cumulative corruption code */ +} SHA1Context; + +/* + * This structure will hold context information for the SHA-256 + * hashing operation. + */ +typedef struct SHA256Context { + uint32_t Intermediate_Hash[SHA256HashSize/4]; /* Message Digest */ + + uint32_t Length_High; /* Message length in bits */ + uint32_t Length_Low; /* Message length in bits */ + + int_least16_t Message_Block_Index; /* Message_Block array index */ + /* 512-bit message blocks */ + uint8_t Message_Block[SHA256_Message_Block_Size]; + + int Computed; /* Is the hash computed? */ + int Corrupted; /* Cumulative corruption code */ +} SHA256Context; + +/* + * This structure will hold context information for the SHA-512 + * hashing operation. + */ +typedef struct SHA512Context { +#ifdef USE_32BIT_ONLY + uint32_t Intermediate_Hash[SHA512HashSize/4]; /* Message Digest */ + uint32_t Length[4]; /* Message length in bits */ +#else /* !USE_32BIT_ONLY */ + uint64_t Intermediate_Hash[SHA512HashSize/8]; /* Message Digest */ + uint64_t Length_High, Length_Low; /* Message length in bits */ +#endif /* USE_32BIT_ONLY */ + + int_least16_t Message_Block_Index; /* Message_Block array index */ + /* 1024-bit message blocks */ + uint8_t Message_Block[SHA512_Message_Block_Size]; + + int Computed; /* Is the hash computed?*/ + int Corrupted; /* Cumulative corruption code */ +} SHA512Context; + +/* + * This structure will hold context information for the SHA-224 + * hashing operation. It uses the SHA-256 structure for computation. + */ +typedef struct SHA256Context SHA224Context; + +/* + * This structure will hold context information for the SHA-384 + * hashing operation. It uses the SHA-512 structure for computation. + */ +typedef struct SHA512Context SHA384Context; + +/* + * This structure holds context information for all SHA + * hashing operations. + */ +typedef struct USHAContext { + int whichSha; /* which SHA is being used */ + union { + SHA1Context sha1Context; + SHA224Context sha224Context; SHA256Context sha256Context; + SHA384Context sha384Context; SHA512Context sha512Context; + } ctx; +} USHAContext; + +/* + * This structure will hold context information for the HMAC + * keyed-hashing operation. + */ +typedef struct HMACContext { + int whichSha; /* which SHA is being used */ + int hashSize; /* hash size of SHA being used */ + int blockSize; /* block size of SHA being used */ + USHAContext shaContext; /* SHA context */ + unsigned char k_opad[USHA_Max_Message_Block_Size]; + /* outer padding - key XORd with opad */ + int Computed; /* Is the MAC computed? */ + int Corrupted; /* Cumulative corruption code */ + +} HMACContext; + +/* + * This structure will hold context information for the HKDF + * extract-and-expand Key Derivation Functions. + */ +typedef struct HKDFContext { + int whichSha; /* which SHA is being used */ + HMACContext hmacContext; + int hashSize; /* hash size of SHA being used */ + unsigned char prk[USHAMaxHashSize]; + /* pseudo-random key - output of hkdfInput */ + int Computed; /* Is the key material computed? */ + int Corrupted; /* Cumulative corruption code */ +} HKDFContext; + +/* + * Function Prototypes + */ + +/* SHA-1 */ +extern int SHA1Reset(SHA1Context *); +extern int SHA1Input(SHA1Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA1FinalBits(SHA1Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA1Result(SHA1Context *, + uint8_t Message_Digest[SHA1HashSize]); + +/* SHA-224 */ +extern int SHA224Reset(SHA224Context *); +extern int SHA224Input(SHA224Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA224FinalBits(SHA224Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA224Result(SHA224Context *, + uint8_t Message_Digest[SHA224HashSize]); + +/* SHA-256 */ +extern int SHA256Reset(SHA256Context *); +extern int SHA256Input(SHA256Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA256FinalBits(SHA256Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA256Result(SHA256Context *, + uint8_t Message_Digest[SHA256HashSize]); + +/* SHA-384 */ +extern int SHA384Reset(SHA384Context *); +extern int SHA384Input(SHA384Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA384FinalBits(SHA384Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA384Result(SHA384Context *, + uint8_t Message_Digest[SHA384HashSize]); + +/* SHA-512 */ +extern int SHA512Reset(SHA512Context *); +extern int SHA512Input(SHA512Context *, const uint8_t *bytes, + unsigned int bytecount); +extern int SHA512FinalBits(SHA512Context *, uint8_t bits, + unsigned int bit_count); +extern int SHA512Result(SHA512Context *, + uint8_t Message_Digest[SHA512HashSize]); + +/* Unified SHA functions, chosen by whichSha */ +extern int USHAReset(USHAContext *context, SHAversion whichSha); +extern int USHAInput(USHAContext *context, + const uint8_t *bytes, unsigned int bytecount); +extern int USHAFinalBits(USHAContext *context, + uint8_t bits, unsigned int bit_count); +extern int USHAResult(USHAContext *context, + uint8_t Message_Digest[USHAMaxHashSize]); +extern int USHABlockSize(enum SHAversion whichSha); +extern int USHAHashSize(enum SHAversion whichSha); +extern int USHAHashSizeBits(enum SHAversion whichSha); +extern const char *USHAHashName(enum SHAversion whichSha); + +/* + * HMAC Keyed-Hashing for Message Authentication, RFC 2104, + * for all SHAs. + * This interface allows a fixed-length text input to be used. + */ +extern int hmac(SHAversion whichSha, /* which SHA algorithm to use */ + const unsigned char *text, /* pointer to data stream */ + int text_len, /* length of data stream */ + const unsigned char *key, /* pointer to authentication key */ + int key_len, /* length of authentication key */ + uint8_t digest[USHAMaxHashSize]); /* caller digest to fill in */ + +/* + * HMAC Keyed-Hashing for Message Authentication, RFC 2104, + * for all SHAs. + * This interface allows any length of text input to be used. + */ +extern int hmacReset(HMACContext *context, enum SHAversion whichSha, + const unsigned char *key, int key_len); +extern int hmacInput(HMACContext *context, const unsigned char *text, + int text_len); +extern int hmacFinalBits(HMACContext *context, uint8_t bits, + unsigned int bit_count); +extern int hmacResult(HMACContext *context, + uint8_t digest[USHAMaxHashSize]); + +/* + * HKDF HMAC-based Extract-and-Expand Key Derivation Function, + * RFC 5869, for all SHAs. + */ +extern int hkdf(SHAversion whichSha, const unsigned char *salt, + int salt_len, const unsigned char *ikm, int ikm_len, + const unsigned char *info, int info_len, + uint8_t okm[ ], int okm_len); +extern int hkdfExtract(SHAversion whichSha, const unsigned char *salt, + int salt_len, const unsigned char *ikm, + int ikm_len, uint8_t prk[USHAMaxHashSize]); +extern int hkdfExpand(SHAversion whichSha, const uint8_t prk[ ], + int prk_len, const unsigned char *info, + int info_len, uint8_t okm[ ], int okm_len); + +/* + * HKDF HMAC-based Extract-and-Expand Key Derivation Function, + * RFC 5869, for all SHAs. + * This interface allows any length of text input to be used. + */ +extern int hkdfReset(HKDFContext *context, enum SHAversion whichSha, + const unsigned char *salt, int salt_len); +extern int hkdfInput(HKDFContext *context, const unsigned char *ikm, + int ikm_len); +extern int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, + unsigned int ikm_bit_count); +extern int hkdfResult(HKDFContext *context, + uint8_t prk[USHAMaxHashSize], + const unsigned char *info, int info_len, + uint8_t okm[USHAMaxHashSize], int okm_len); +#endif /* _SHA_H_ */ diff --git a/tests/sha224-256.c b/tests/sha224-256.c new file mode 100644 index 00000000..2d963e65 --- /dev/null +++ b/tests/sha224-256.c @@ -0,0 +1,601 @@ +/* +RFC 6234 SHAs, HMAC-SHAs, and HKDF May 2011 + + +Copyright Notice + + Copyright (c) 2011 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. +*/ + +/************************* sha224-256.c ************************/ +/***************** See RFC 6234 for details. *******************/ +/* Copyright (c) 2011 IETF Trust and the persons identified as */ +/* authors of the code. All rights reserved. */ +/* See sha.h for terms of use and redistribution. */ + +/* + * Description: + * This file implements the Secure Hash Algorithms SHA-224 and + * SHA-256 as defined in the U.S. National Institute of Standards + * and Technology Federal Information Processing Standards + * Publication (FIPS PUB) 180-3 published in October 2008 + * and formerly defined in its predecessors, FIPS PUB 180-1 + * and FIP PUB 180-2. + * + * A combined document showing all algorithms is available at + * http://csrc.nist.gov/publications/fips/ + * fips180-3/fips180-3_final.pdf + * + * The SHA-224 and SHA-256 algorithms produce 224-bit and 256-bit + * message digests for a given data stream. It should take about + * 2**n steps to find a message with the same digest as a given + * message and 2**(n/2) to find any two messages with the same + * digest, when n is the digest size in bits. Therefore, this + * algorithm can serve as a means of providing a + * "fingerprint" for a message. + * + * Portability Issues: + * SHA-224 and SHA-256 are defined in terms of 32-bit "words". + * This code uses (included via "sha.h") to define 32- + * and 8-bit unsigned integer types. If your C compiler does not + * support 32-bit unsigned integers, this code is not + * appropriate. + * + * Caveats: + * SHA-224 and SHA-256 are designed to work with messages less + * than 2^64 bits long. This implementation uses SHA224/256Input() + * to hash the bits that are a multiple of the size of an 8-bit + * octet, and then optionally uses SHA224/256FinalBits() + * to hash the final few bits of the input. + */ + +#include "tests/sha.h" +#include "tests/sha-private.h" + +/* Define the SHA shift, rotate left, and rotate right macros */ +#define SHA256_SHR(bits,word) ((word) >> (bits)) +#define SHA256_ROTL(bits,word) \ + (((word) << (bits)) | ((word) >> (32-(bits)))) +#define SHA256_ROTR(bits,word) \ + (((word) >> (bits)) | ((word) << (32-(bits)))) + +/* Define the SHA SIGMA and sigma macros */ +#define SHA256_SIGMA0(word) \ + (SHA256_ROTR( 2,word) ^ SHA256_ROTR(13,word) ^ SHA256_ROTR(22,word)) +#define SHA256_SIGMA1(word) \ + (SHA256_ROTR( 6,word) ^ SHA256_ROTR(11,word) ^ SHA256_ROTR(25,word)) +#define SHA256_sigma0(word) \ + (SHA256_ROTR( 7,word) ^ SHA256_ROTR(18,word) ^ SHA256_SHR( 3,word)) +#define SHA256_sigma1(word) \ + (SHA256_ROTR(17,word) ^ SHA256_ROTR(19,word) ^ SHA256_SHR(10,word)) + +/* + * Add "length" to the length. + * Set Corrupted when overflow has occurred. + */ +static uint32_t addTemp; +#define SHA224_256AddLength(context, length) \ + (addTemp = (context)->Length_Low, (context)->Corrupted = \ + (((context)->Length_Low += (length)) < addTemp) && \ + (++(context)->Length_High == 0) ? shaInputTooLong : \ + (context)->Corrupted ) + +/* Local Function Prototypes */ +static int SHA224_256Reset(SHA256Context *context, uint32_t *H0); +static void SHA224_256ProcessMessageBlock(SHA256Context *context); +static void SHA224_256Finalize(SHA256Context *context, + uint8_t Pad_Byte); +static void SHA224_256PadMessage(SHA256Context *context, + uint8_t Pad_Byte); +static int SHA224_256ResultN(SHA256Context *context, + uint8_t Message_Digest[ ], int HashSize); + +/* Initial Hash Values: FIPS 180-3 section 5.3.2 */ +static uint32_t SHA224_H0[SHA256HashSize/4] = { + 0xC1059ED8, 0x367CD507, 0x3070DD17, 0xF70E5939, + 0xFFC00B31, 0x68581511, 0x64F98FA7, 0xBEFA4FA4 +}; + +/* Initial Hash Values: FIPS 180-3 section 5.3.3 */ +static uint32_t SHA256_H0[SHA256HashSize/4] = { + 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A, + 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19 +}; + +/* + * SHA224Reset + * + * Description: + * This function will initialize the SHA224Context in preparation + * for computing a new SHA224 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + */ +int SHA224Reset(SHA224Context *context) +{ + return SHA224_256Reset(context, SHA224_H0); +} + +/* + * SHA224Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + * + */ +int SHA224Input(SHA224Context *context, const uint8_t *message_array, + unsigned int length) +{ + return SHA256Input(context, message_array, length); +} + +/* + * SHA224FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + */ +int SHA224FinalBits(SHA224Context *context, + uint8_t message_bits, unsigned int length) +{ + return SHA256FinalBits(context, message_bits, length); +} + +/* + * SHA224Result + * + * Description: + * This function will return the 224-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 27. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + */ +int SHA224Result(SHA224Context *context, + uint8_t Message_Digest[SHA224HashSize]) +{ + return SHA224_256ResultN(context, Message_Digest, SHA224HashSize); +} + +/* + * SHA256Reset + * + * Description: + * This function will initialize the SHA256Context in preparation + * for computing a new SHA256 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * + * Returns: + * sha Error Code. + */ +int SHA256Reset(SHA256Context *context) +{ + return SHA224_256Reset(context, SHA256_H0); +} + +/* + * SHA256Input + * + * Description: + * This function accepts an array of octets as the next portion + * of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_array[ ]: [in] + * An array of octets representing the next portion of + * the message. + * length: [in] + * The length of the message in message_array. + * + * Returns: + * sha Error Code. + */ +int SHA256Input(SHA256Context *context, const uint8_t *message_array, + unsigned int length) +{ + if (!context) return shaNull; + if (!length) return shaSuccess; + if (!message_array) return shaNull; + if (context->Computed) return context->Corrupted = shaStateError; + if (context->Corrupted) return context->Corrupted; + + while (length--) { + context->Message_Block[context->Message_Block_Index++] = + *message_array; + + if ((SHA224_256AddLength(context, 8) == shaSuccess) && + (context->Message_Block_Index == SHA256_Message_Block_Size)) + SHA224_256ProcessMessageBlock(context); + + message_array++; + } + + return context->Corrupted; + +} + +/* + * SHA256FinalBits + * + * Description: + * This function will add in any final bits of the message. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * message_bits: [in] + * The final bits of the message, in the upper portion of the + * byte. (Use 0b###00000 instead of 0b00000### to input the + * three bits ###.) + * length: [in] + * The number of bits in message_bits, between 1 and 7. + * + * Returns: + * sha Error Code. + */ +int SHA256FinalBits(SHA256Context *context, + uint8_t message_bits, unsigned int length) +{ + static uint8_t masks[8] = { + /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, + /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, + /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, + /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE + }; + static uint8_t markbit[8] = { + /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, + /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, + /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, + /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 + }; + + if (!context) return shaNull; + if (!length) return shaSuccess; + if (context->Corrupted) return context->Corrupted; + if (context->Computed) return context->Corrupted = shaStateError; + if (length >= 8) return context->Corrupted = shaBadParam; + + SHA224_256AddLength(context, length); + SHA224_256Finalize(context, (uint8_t) + ((message_bits & masks[length]) | markbit[length])); + + return context->Corrupted; +} + +/* + * SHA256Result + * + * Description: + * This function will return the 256-bit message digest + * into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 31. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * + * Returns: + * sha Error Code. + */ +int SHA256Result(SHA256Context *context, + uint8_t Message_Digest[SHA256HashSize]) +{ + return SHA224_256ResultN(context, Message_Digest, SHA256HashSize); +} + +/* + * SHA224_256Reset + * + * Description: + * This helper function will initialize the SHA256Context in + * preparation for computing a new SHA-224 or SHA-256 message digest. + * + * Parameters: + * context: [in/out] + * The context to reset. + * H0[ ]: [in] + * The initial hash value array to use. + * + * Returns: + * sha Error Code. + */ +static int SHA224_256Reset(SHA256Context *context, uint32_t *H0) +{ + if (!context) return shaNull; + + context->Length_High = context->Length_Low = 0; + context->Message_Block_Index = 0; + + context->Intermediate_Hash[0] = H0[0]; + context->Intermediate_Hash[1] = H0[1]; + context->Intermediate_Hash[2] = H0[2]; + context->Intermediate_Hash[3] = H0[3]; + context->Intermediate_Hash[4] = H0[4]; + context->Intermediate_Hash[5] = H0[5]; + context->Intermediate_Hash[6] = H0[6]; + context->Intermediate_Hash[7] = H0[7]; + + context->Computed = 0; + context->Corrupted = shaSuccess; + + return shaSuccess; +} + +/* + * SHA224_256ProcessMessageBlock + * + * Description: + * This helper function will process the next 512 bits of the + * message stored in the Message_Block array. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * + * Returns: + * Nothing. + * + * Comments: + * Many of the variable names in this code, especially the + * single character names, were used because those were the + * names used in the Secure Hash Standard. + */ +static void SHA224_256ProcessMessageBlock(SHA256Context *context) +{ + /* Constants defined in FIPS 180-3, section 4.2.2 */ + static const uint32_t K[64] = { + 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, + 0x59f111f1, 0x923f82a4, 0xab1c5ed5, 0xd807aa98, 0x12835b01, + 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, + 0xc19bf174, 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, + 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da, 0x983e5152, + 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, + 0x06ca6351, 0x14292967, 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, + 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85, + 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, + 0xd6990624, 0xf40e3585, 0x106aa070, 0x19a4c116, 0x1e376c08, + 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, + 0x682e6ff3, 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, + 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 + }; + int t, t4; /* Loop counter */ + uint32_t temp1, temp2; /* Temporary word value */ + uint32_t W[64]; /* Word sequence */ + uint32_t A, B, C, D, E, F, G, H; /* Word buffers */ + + /* + * Initialize the first 16 words in the array W + */ + for (t = t4 = 0; t < 16; t++, t4 += 4) + W[t] = (((uint32_t)context->Message_Block[t4]) << 24) | + (((uint32_t)context->Message_Block[t4 + 1]) << 16) | + (((uint32_t)context->Message_Block[t4 + 2]) << 8) | + (((uint32_t)context->Message_Block[t4 + 3])); + + for (t = 16; t < 64; t++) + W[t] = SHA256_sigma1(W[t-2]) + W[t-7] + + SHA256_sigma0(W[t-15]) + W[t-16]; + + A = context->Intermediate_Hash[0]; + B = context->Intermediate_Hash[1]; + C = context->Intermediate_Hash[2]; + D = context->Intermediate_Hash[3]; + E = context->Intermediate_Hash[4]; + F = context->Intermediate_Hash[5]; + G = context->Intermediate_Hash[6]; + H = context->Intermediate_Hash[7]; + + for (t = 0; t < 64; t++) { + temp1 = H + SHA256_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; + temp2 = SHA256_SIGMA0(A) + SHA_Maj(A,B,C); + H = G; + G = F; + F = E; + E = D + temp1; + D = C; + C = B; + B = A; + A = temp1 + temp2; + } + + context->Intermediate_Hash[0] += A; + context->Intermediate_Hash[1] += B; + context->Intermediate_Hash[2] += C; + context->Intermediate_Hash[3] += D; + context->Intermediate_Hash[4] += E; + context->Intermediate_Hash[5] += F; + context->Intermediate_Hash[6] += G; + context->Intermediate_Hash[7] += H; + + context->Message_Block_Index = 0; +} + +/* + * SHA224_256Finalize + * + * Description: + * This helper function finishes off the digest calculations. + * + * Parameters: + * context: [in/out] + * The SHA context to update. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * sha Error Code. + */ +static void SHA224_256Finalize(SHA256Context *context, + uint8_t Pad_Byte) +{ + int i; + SHA224_256PadMessage(context, Pad_Byte); + /* message may be sensitive, so clear it out */ + for (i = 0; i < SHA256_Message_Block_Size; ++i) + context->Message_Block[i] = 0; + context->Length_High = 0; /* and clear length */ + context->Length_Low = 0; + context->Computed = 1; +} + +/* + * SHA224_256PadMessage + * + * Description: + * According to the standard, the message must be padded to the next + * even multiple of 512 bits. The first padding bit must be a '1'. + * The last 64 bits represent the length of the original message. + * All bits in between should be 0. This helper function will pad + * the message according to those rules by filling the + * Message_Block array accordingly. When it returns, it can be + * assumed that the message digest has been computed. + * + * Parameters: + * context: [in/out] + * The context to pad. + * Pad_Byte: [in] + * The last byte to add to the message block before the 0-padding + * and length. This will contain the last bits of the message + * followed by another single bit. If the message was an + * exact multiple of 8-bits long, Pad_Byte will be 0x80. + * + * Returns: + * Nothing. + */ +static void SHA224_256PadMessage(SHA256Context *context, + uint8_t Pad_Byte) +{ + /* + * Check to see if the current message block is too small to hold + * the initial padding bits and length. If so, we will pad the + * block, process it, and then continue padding into a second + * block. + */ + if (context->Message_Block_Index >= (SHA256_Message_Block_Size-8)) { + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + while (context->Message_Block_Index < SHA256_Message_Block_Size) + context->Message_Block[context->Message_Block_Index++] = 0; + SHA224_256ProcessMessageBlock(context); + } else + context->Message_Block[context->Message_Block_Index++] = Pad_Byte; + + while (context->Message_Block_Index < (SHA256_Message_Block_Size-8)) + context->Message_Block[context->Message_Block_Index++] = 0; + + /* + * Store the message length as the last 8 octets + */ + context->Message_Block[56] = (uint8_t)(context->Length_High >> 24); + context->Message_Block[57] = (uint8_t)(context->Length_High >> 16); + context->Message_Block[58] = (uint8_t)(context->Length_High >> 8); + context->Message_Block[59] = (uint8_t)(context->Length_High); + context->Message_Block[60] = (uint8_t)(context->Length_Low >> 24); + context->Message_Block[61] = (uint8_t)(context->Length_Low >> 16); + context->Message_Block[62] = (uint8_t)(context->Length_Low >> 8); + context->Message_Block[63] = (uint8_t)(context->Length_Low); + + SHA224_256ProcessMessageBlock(context); +} + +/* + * SHA224_256ResultN + * + * Description: + * This helper function will return the 224-bit or 256-bit message + * digest into the Message_Digest array provided by the caller. + * NOTE: + * The first octet of hash is stored in the element with index 0, + * the last octet of hash in the element with index 27/31. + * + * Parameters: + * context: [in/out] + * The context to use to calculate the SHA hash. + * Message_Digest[ ]: [out] + * Where the digest is returned. + * HashSize: [in] + * The size of the hash, either 28 or 32. + * + * Returns: + * sha Error Code. + */ +static int SHA224_256ResultN(SHA256Context *context, + uint8_t Message_Digest[ ], int HashSize) +{ + int i; + + if (!context) return shaNull; + if (!Message_Digest) return shaNull; + if (context->Corrupted) return context->Corrupted; + + if (!context->Computed) + SHA224_256Finalize(context, 0x80); + + for (i = 0; i < HashSize; ++i) + Message_Digest[i] = (uint8_t) + (context->Intermediate_Hash[i>>2] >> 8 * ( 3 - ( i & 0x03 ) )); + + return shaSuccess; +}